Thruxton 1200 (2016 -...)

Thruxton 1200 (2016 -...)

Showing 1-18 of 18 item(s)

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

Leather handlebar grip pad (black, brown, gold, red) for motorcycle

Leather handlebar grip pad (black, brown, gold, red) for motorcycle 2

Parts

Leather handlebar pad

Leather-covered handlebar pad. Beyond the protection it provides in case of impact with your handlebar, this pad and its leather cover will give a more refined look to the front of your machine. Our craftsmen reinterpret the codes of off-road handlebar pads here to give them an aesthetic use. The inner diameter that contacts the crossbar is ø12mm, the...

View

Classic headlight with integrated speedo for Triumph (2016-...) by BAAK

Classic headlight with integrated speedo for Triumph (2016-...) by BAAK 2

Triumph

Classic headlight with integrated gauge for Triumph (after 2016)

Classic Headlight / Integrated Speedometer for Triumph Integrated into the nacelle of a Classic ø180mm headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to tidy the cockpit of your Triumph while retaining the information from your original instrument and ensuring optimal readability. The speedometer dial is available...

View

Bates headlight / Integrated speedometer for Triumph (2016-...) by BAAK

Bates headlight / Integrated speedometer for Triumph (2016-...) by BAAK 2

Triumph

Bates headlight with integrated speedo for Triumph (after 2016)

Bates headlight / integrated speedometer for Triumph Integrated into a Bates housing ø150mm, this motogadget Tiny Plug & Play speedometer is a simple solution to clean up the cockpit of your Triumph while keeping the information from your original instrument. The assembly is delivered pre-wired, with its multiplexing box, its wiring harness, and its...

View

Headlight plate for Bates headlight Triumph (2016-...)

Headlight plate for Bates headlight Triumph (2016-...) 2

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

Extension for Classic round motorcycle mirror ø10

Extension for Classic round motorcycle mirror ø10 2

Parts

Extension for Classic round motorcycle mirror ø10

Aluminum extension for Classic round Mirror. This extension, compatible only with our Classic round Mirror, allows you to lengthen the mirror stem for improved rear visibility and offers greater adjustment options. It has the same finish as the mirror stem. This extension measures 55mm in length (center-to-center = 35mm). Sold individually.

Ignition switch relocator for Triumph (after 2016)

Ignition switch relocator for Triumph (after 2016) 2

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Classic round motorcycle mirror ø10

Classic round motorcycle mirror ø10 2

Parts

Classic round motorcycle mirror ø10

Round motorcycle mirror Classic in aluminum. This black mirror with a Ø10cm glass offers an impeccable finish while remaining discreet. It provides perfect rear visibility and fits any motorcycle. Adjustable in height thanks to its 150mm articulated stem. Supplied with two adapters (left-hand and right-hand thread M10x1.25 mm). Additional adapters...

View

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum 2

Parts

Handlebar risers motorcycle - universal

Machined aluminum handlebar clamps for motorcycles. Available in diameters ø22mm, ø28.6mm or 1 inch (ø25.4mm), these machined aluminum clamps are lightweight and elegant. They are finished in high-quality satin black epoxy, machined from solid and delivered with stainless steel fasteners (size options available) Designed and manufactured by the BAAK...

View

Leather handlebar grips

Leather handlebar grips 2

Parts

Leather handlebar grips

Leather handlebar grips. Wrapped in high-quality leather, they add a touch of elegance to your machine while maintaining a secure grip. Available in black leather, aged brown, gold. Four thread colors available to perfectly match your bike. For 1" (ø25.4mm) or ø22mm diameter handlebars. Supplied in pairs

View

Biltwell Thruster handlebar grips

Biltwell Thruster handlebar grips 2

Parts

Biltwell Thruster handlebar grips

Handlebar grips Biltwell Thruster right and left, for characterful motorcycles. Provide a secure grip on the bars, perfect comfort and a look unmatched from stock. For 1" (25.4mm) or ø22mm diameter handlebars. Supplied in pairs.

View

Biltwell Renegade handlebar grips

Biltwell Renegade handlebar grips 2

Parts

Biltwell Renegade handlebar grips

Handlebar grips Biltwell Renegade right and left, for characterful motorcycles. Provide a secure hold on the bars, perfect comfort and a look unmatched by the original. For 1" (ø25.4mm) or ø22mm handlebars. Supplied in pairs. Available in black only.

View

Round motorcycle mirror ø8

Round motorcycle mirror ø8 2

Parts

Round motorcycle mirror ø8

Mini mirror in steel with a Ø8cm diameter and M8 thread, ideal for a high position. The mirror stem measures 13cm long; its bend is specifically designed to ensure good rear visibility while remaining discreet. Sold individually, available in satin black only. Suitable for mounting on the right or left side.

View

Leather cable-guide strap

Leather cable-guide strap 2

Parts

Leather cable-guide strap

Leather cable strap. This leather strap lets you secure your cables together or attach them to your handlebar. If, like us, the finish of your machine is one of your obsessions, this strap is ideal for your project. Available in Aged Brown leather, Black and Gold. Available in lengths 80mm, 90mm, 115mm, 130mm. Width 20mm. Sold individually, not in pairs.

View

Long wiring harness kit for Triumph (post-2016)

Long wiring harness kit for Triumph (post-2016) 2

-10%

Triumph

Long wiring harness kit for Triumph (post-2016)

€75.60 €84.00

Time left

Long cable kit for Triumph (2016-...) allowing the fitment of a wider handlebar on your bike. The kit includes the front brake hose extension and the clutch cable. We use it on the majority of our BAAK customized Triumphs.

View

Ø22mm handlebar rear view mirror

Ø22mm handlebar rear view mirror 2

Parts

Mirror adapter

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View