Parts » Moto Guzzi

License plate support for Moto Guzzi V9 original fender

Moto Guzzi V9 license plate support for original rear fender. This satin black epoxy painted part comes in place of your original support.

This kit is composed of a license plate support, a round LED taillight with plate lightning, a pair of turn signals brackets on choice, a plug & play wiring harness and two optionnal pairs of blinkers. 

150 €

Mini LED turn signals

Mini LED turn signals in aluminium with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

78 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Mini round aluminum turn signals

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

55 €

Plastic mini turn signals

Mini turn signals / blinkers made in plastic. With its M10 fixation, it comes in place of most of the original blinkers. 10w bulb included.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Available with Long shaft (37mm) or Short shaft (17mm).

Sold in pairs. Blinkers dimension : 45x55mm. 

19 €

Resistors for LED turn indicators

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. 

Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

8 €

Speedometer bracket for Moto Guzzi V9

Speedometer bracket for Moto Guzzi V9, enables you to relocate your speedometer in a lower position and on the left side. This part fits your original upper triple trees. This parts is manufactured in stainless steel 3mm thick, powder coat painted.

49 €

Front turn signals bracket for Moto Guzzi

Turn signals support for Moto Guzzi, simple, effective and very discreet. Stainless steel laser cut and epoxy painted in satin black.

It mounts on the upper regulator screw of your motorcycle. Suits Moto Guzzi V7 I, V7 II, V7 III and V9. Sold without blinkers.

19 €

Rear turn signals bracket for Moto Guzzi V7

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the shock absorber axis for a more discreet look. 

Comes in pairs. This part suits Moto Guzzi V7 I, V7 II, V7 III and V9.

19 €

Documents tube holder

This tube motorcycles documents holder enables you place your insurance card / document anywhere on your motorcycle. This cylinder is waterproof, the card remains perfectly visible, it's easy to assemble anywhere on the motorcycle. Available in black color only.

Height : 70mm / Diameter : 20mm.

32 €

Monza gas cap

Monza gas tank cap. The legendary Monza cap will perfectly suit your gas tank thanks to our exclusive adapter. 

The full kit includes the gas cap, the seal, the necessary screwing and the adapter. This part is manufactured in aluminium, it's polished finish.

Beware of poor quality copies.

129 €

Mount bracket - below the handlebar

Motogadget Tiny speedometer fixation bracket. It's a machined aluminium bracket, satin black powder coated. It's available for Triumph Bonneville, Scrambler, Thruxton (old generation - before 2016) and for Moto Guzzi V7.

This part comes with all the necessary screwing.

49 €

Moto Guzzi V9 rearset

Machined rearset for Moto Guzzi V9. This machined stainles steel (5mm thick) kit enables you to move 70mm back the controls of your motorcycle and enjoy a more comfortable and sporty riding position. 

Manufactured at our workshop, satin black epoxy painting finish, comes in pairs with all the necessary stainless steel screwing. Rear brake hose included.

99 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Handlebar grips

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

18 €

Handlebar grips

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

18 €

Leather care cream

This cream is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc.

Capacity : 150 ml.

18 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we recommend you to paint it with a special high temperature painting, so the color can resist over the months.

It's a great quality part, beware of low-cost ones! Comes with 8 optional stainless steel collars.

83 €

Rear fender wiring harness for Moto Guzzi - short

Rear fender wiring harness for Moto Guzzi. This wiring harness is essential to connect a aftermarket set of turn signals and taillight. It's plug & play over the pods of your motorcycle. 

This parts fit the Moto Guzzi V7, V7 II, V7 III and V9.

This part comes with all the mudguards we provide for Moto Guzzi. This wiring harness is designed and manufactured at our workshop in France.

19 €

Headlight wiring harness extension

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness.

Length : 420mm

19 €

Scroll To Top