Parts » Triumph

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

34 €

Classic round mirror

Classic round motorcycle mirror. This Ø100mm mirror offers a perfect finish while remaining discreet. It gives a great rear visibility and can be fitted on any motorcycle. Available in black only.

It can be adjusted thanks to its articulated 135m long shaft and to the kneecap of the mirror. 

It's sold per unit, and comes with two adapters (left thread and right thread).

45 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

199 €

Leather saddlebag for Triumph

Side leather saddlebag for Triumph Bonneville, Scrambler, Thruxton (before 2016). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a black satin painted aluminium plate that comes in place of your original side cover. 

275 €

Handlebar controls for Triumph (since 2016)

Handlebar controls for Triumph Bonneville T100 / T120 (since 2016) with 1 inch (25,4mm) diameter handlebar. The push buttons can be linked to any functions : 

  • Throttle housing wich enables keep the ride-by-wire system + 2 buttons
  • 3 buttons switch with a turn switch + 2 buttons

Manufactured out of machined aluminium, satin black powder coat painted.

300 €

Triumph Bobber exhaust

Bobber exhaust line for Triumph, designed and handcrafted at our workshop. The manifolds are in stainless steel, the mufflers in aluminium. 

It provides a rough and deeper sound but remains discreet. This part isn't road approved. 

Suits Triumph Bonneville EFI before 2016 (Bonneville, Thruxton and Scrambler) and carburetor. 

1 150 €

Leather saddlebag for Triumph T120, T100, Street Twin

Side leather saddlebag for Triumph Bonneville T120, T100 (from 2016), Street Twin / Cup and Street Scrambler. This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a Brushed or Satin black aluminium cover that comes in place of your original side cover. 

275 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

145 €

Flat track handlebars

Flat Track handlebar manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in Ø22mm diameter, and in Chromed or Brushed finish. 

69 €

BAAK N°1 handlebars - Satin black

Wide stailness steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a good quality part.

115 €

BAAK N°1 handlebars - Ø22mm

Wide stainless steel BAAK N°1 handlebars in Ø22mm diameter. It's flatter, wider and has more pullback / sweep to the driver than most of the other handlebars. It will offer a very distinguised look to your motorcycle, improves its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a great quality part.

95 €

Street Bar handlebars with optional handlebar clamps

Street Bar handlebar and risers / clamps in aluminium. This bar is perfect to give a more agressive look to your motorcycle and a more sporty riding position.  

The centric part / clamping area is 28,6mm diameter, the ends are 22mm diameter, which can require to adapt compatible handlebar clamps in Fat-bar handlebar as the ones we offer in option with this part.

115 €

Handlebar

Tracker Bar, made out of steel. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a combortable riding position. 

It's available in satin black finish only.

115 €

Scrambler chromed handlebars

Scrambler chromed handlebars, 22mm diameter. Made out of steel, it offers a better finish level than most of the original handlebars. It's high and has a good pullback / swipe to the rider, which gives a better driving position and comfort. 

With its central bar, it will offer a real scrambler look to your motorcycle.

65 €

Aluminium handlebar clamps

Machined aluminium handlebar clamps for motorcycle. These risers are available in 22mm diameter, 28,6mm diameter or 1 inch diameter (25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing.

Designed and manufactured at BAAK's workshop.

135 €

Kit long cables for Triumph

Long cables kit for Triumph (before 2016), essential to fit a wide handlebar for:
(From 76cm ​​wide)

  • Bonneville T100 handlebars 1 " (25,4mm)
  • Thruxton handlebars 1 " (25,4mm)

This kit is composed of the clutch cable, the accelerator cable and the brake hose.

39 €

Kit long cables for Triumph (new generation)

Long cables kit for Triumph (after 2016), it enables to mount wide handlebars on your bike. This kit includes the front brake hose extension and the clutch cable. 

Suits the Triumph Bonneville T100 / T120, Street Twin / Street Scrambler and Thruxton 1200. 

65 €

Leather cell phone mount - Aged brown

Universal cell phone mount made out of leather. This tiny bag is design to be assembled on your motorcycle handlebar. It enables you watch and use your smartphone while riding has its front transparent surface is touch sensitive. It gets closed thanks to a velcro that makes it easy to connect the phone cable while riding.

Available in Aged brown, Black, Ruby or Gold genuine leather.

145 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in Aged brown, Black, Gold or Ruby leather. Available in 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

8 €

Mini speedometer for Triumph EFI - Below the handlebar fixation

Tiny speedometer manufactured by motogadget for Triumph Bonneville, Scrambler or Thruxton (before 2016). Mounted on a plate developed by BAAK Motorcycles, made in aluminium, epoxy  satin black painted.

Comes assembled and connected to a compatible wiring harness (plug and play).

Two locations available : Above the steering column (behind the handlebar) and classic position.

495 €

Cable speedometer for Triumph

Mini round speedometer for Triumph Bonneville / Scrambler / Thruxton carburators with cable speedometers and Triumph EFI up to 2011.

With neutral indicator, wiring harness, oil pressure and turn signals.

This speedometer comes with its plug & play wiring harness. Available in black only.

219 €

Leather seat Classic for Triumph Street Twin / Street Scrambler

Leather seat Classic for Triumph Street Twin / Street Scrambler. It's handcrafted by ourself at our workshop. It's 2,5cm narrower than the original one, which considerably improves the look of your Triumph. We use an high quality french leather to handcraft this seat. 

The 6cm foam thickness gives a good comfort and a flat saddle look. The seat lock system is preserved.

690 €

Leather seat for Triumph Thruxton 1200

Flat leather seat for Triumph Thruxton 1200 (from 2016). This leather seat is handcrafted at BAAK's workshop. It's more flat than the stock seat, offers a touch of chic to your bike and enable you to bring a passenger with comfort.

This seat is available in 4 different leather color and 2 shapes of stitchings. Suits the Thruxton 1200 and 1200 R.

690 €

Leather seat Heritage for Triumph T120 & T100

Leather seat Heritage for Triumph T120 and T100 (from 2016). This leather saddle is handcrafted at our workshop. It's 2,5cm narrower than the original one, which considerably improves the look of the Triumph T120 or T100. We use high quality french leather to make this seat. 

The seat foam is 6cm thick which gives a good comfort and a flat look. It's available in classic or diamonds rib-shaped. 

690 €

License plate support for Triumph original fender

License plate support with its tail light, for Triumph Bonneville - Scrambler - Thruxton (before 2016) original fender. Comes in place of the original block.

The mini turn signals are optional, it includes two pairs of turn signals, can be set in classic position or on the shock absorber axis. 

Designed and manufactured at our workshop in France.

150 €

Mini front fender for Triumph

Mini stainless steel front mudguard for Triumph, perfect to modify the look of your motorcycle while keeping a good protection.

It's pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, T100 and T120 from 2016. 

125 €

"Avant" pack for Triumph Street Twin

Full kit to visually lighten the front of your Triumph and give it a more aggressive look. 

This pack includes : 

  • Metal flat headlight
  • 60mm headlight brackets
  • Side speedometer support
  • Under the steering column turn signals support + long wiring harness + pair of front turn signals
  • Regulator support 

Suit the Triumph Street Twin, Street Cup and Street Scrambler.

379 €

Scroll To Top