Parts

Showing 145-168 of 411 item(s)

Royal Enfield

Exhaust silencers for Royal Enfield Himalayan

Short exhaust silencer for Royal Enfield Himalayan. This aluminium muffler offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no leak from the manifold. Not compliant with...

View

Parts

Large Leather Roll Top Pannier

€897.00

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

View

Parts

Side number panel for Moto Guzzi V7 850

€120.00

Currently unavailable for sale It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material. Size of the side cover : 265 x 225mm Not compatible with V7 850 from 2025 onwards. (E5+)

View

Side leather saddlebag for Moto Guzzi V7 850

Parts

Side leather saddlebag for Moto Guzzi V7 850

€273.00

It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. Not...

View

Parts

Side covers for Moto Guzzi V7 850

€75.00

It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material. Not compatible with V7 850 from 2025 onwards. (E5+)

View

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

View

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€198.00

Optimize your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers specially designed for the original high exhaust line. They not only improve heat protection but also add a dynamic touch to your motorcycle. These covers allow you to replace the original plastic parts with a more robust and aesthetic solution. Easy to install, they fit directly...

View

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

€915.00

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Made of turned leather. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall 50 mm higher than the original seat.

View

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

€782.40

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

View

Heritage leather seat for Moto Guzzi V7 850

Parts

Heritage leather seat for Moto Guzzi V7 850

€859.20

This seat is handmade by our leather artisans at the BAAK workshop in France, using a Moto Guzzi seat pan to ensure perfect compatibility with your bike. It offers a café racer look and good seating comfort. Available in Old Brown, Gold, Black and Chocolat leather. Choose a leather cover with classic, lightning, or diamond-stitched patterns, depending on...

View

Classic leather seat for Moto Guzzi V7 850

Parts

Classic leather seat for Moto Guzzi V7 850

€859.20

This seat is handcrafted by our leather artisans at the BAAK workshop in France, using a Moto Guzzi seat pan for perfect compatibility with your bike. It offers a café racer look and good seating comfort. Available in Old Brown, Gold, Black and Chocolat leather. Choose a leather cover with a classic, lightning, or diamond-stitched top depending on your...

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

€25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

BAAK Turn indicators brackets kit for Triumph Bobber 1200

Parts

Turn indicators brackets kit for Triumph Bobber 1200

€390.00

This kit allows you to relocate the indicators of your Bobber 1200 and thus purify its line. The rear indicators incorporate the brake lights.

Rear BAAK wiring harness for Triumph Bobber 1200

Rear BAAK wiring harness for Triumph Bobber 1200 2

Parts

Rear wiring harness for Triumph Bobber 1200

€39.00

These connectors enable you to connect any item 10W to the original wiring harness of your Bobber 1200 without having to cut or solder any wire.

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

Triumph

Rear mudguard for Bobber 1200 Triumph

€495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Universal

License plate holder for US format

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Flat leather seat for Royal Enfield Interceptor / Continental GT

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

€540.00

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...

View

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

Parts

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

€30.00

Essential for mounting BAAK bates headlights and BAAK scrambler front mudguard on Street Scramblers from 2019.

Bodywork and protection

Leather Desk pad

€255.00

Large BAAK Desk pad for your desk or workbench, made from BAAK leathers. visible stitching and hot stamping of the logo at the bottom right. Handcrafted at the workshop. Dimensions: H 50, W 70

Home

Leather Tool-Roll

€149.00

BAAK leather Tool-Roll with visible stitching, hot stamping of the logo. Several compartments, open and closed. Top flap to hold the tools inside the kit. Dimensions closed (cm): H 10, W 26Open dimensions (cm): H 40, W 40

View

Universal

Large Leather planter

€69.00

Large BAAK Leather planter with visible stitching and hot stamping of the logo. Handmade in our workshops with our selected leathers. Dimensions (cm): H 19, ø24