Parts

Showing 109-144 of 364 item(s)

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

View

Bodywork and protection

Leather Tool-Roll

€149.00

BAAK leather Tool-Roll with visible stitching, hot stamping of the logo. Several compartments, open and closed. Top flap to hold the tools inside the kit. Dimensions closed (cm): H 10, W 26Open dimensions (cm): H 40, W 40

View

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV)

Bullet / Classic (2008- ..)

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV)

€448.00

Mini speedometer for Royal Enfield 500 Bullet / Classic Euro IV (2017-...). This plug & play tiny speedometer solution enables you visually lighten the cockpit of your motorcycle while improving the features displayed on your speedometer. This kit comes pre-wired, with its wiring harness, its satin black aluminium fixation brackets and its assembly...

View

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

Thruxton 1200 (2016 -...)

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

€1,015.00

Pair of stainless steel exhaust mufflers for Triumph Thruxton 1200 (liquid cooled). These silencers are manufactured in France and available in Polished or Brushed finish. It offers a deep and smooth sound. Not compliant with European regulations, but it sounds reasonably loud (less than 100 Db). It comes in pairs with all the necessary mounting hardware...

View

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€300.00

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

€95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

License plate holder for US format with rear light mount

Parts

License plate holder for US format with rear light mount

€45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Royal Enfield

Exhaust silencers for Royal Enfield Himalayan

€345.00

Short exhaust silencer for Royal Enfield Himalayan. This aluminium muffler offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no leak from the manifold. Not compliant with...

View

Electric saddlebag for Royal Enfield Classic / Bullet

Parts

Electric saddlebag for Royal Enfield Classic / Bullet

€273.00

Leather electric saddlebag for Royal Enfield Classic / Bullet 500 EFI (2008-...). Assembled on the Left side, this leather bag comes in place of the original fuse box and lets you relocate the fuse and electric wiring harness inside the bag the elegant way. Assembled on the Right side, it's turned into a storage space, it comes in place of the original...

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€108.00

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

License plate holder kit for Triumph Thruxton 1200 and Speed Twin EUR4 / EUR5 (2016-...). This simple satin black aluminium wheel arch visually lightens the tail of these two Triumph models to reach a more radical aesthetic. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic...

View

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Triumph

Big Body shock absorbers for Triumph Thruxton 1200 / Speed Twin (2016)

€642.00

Wide Big Body shock absorbers for Triumph Thruxton 1200 and Speed Twin 1200 (2016-...). With our manufacturing partner, we designed these aluminium shocks in order to give a stronger look and a better shocks absorption skills to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and relaxation thanks to an only knob, which...

View

Universal classic-vintage motorcycle rear mudguard

Parts

Universal classic-vintage motorcycle rear mudguard

€120.00

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin (2016)

€287.40

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

View

Racer leather seat for Triumph Thruxton 1200

Thruxton 1200 (2016 -...)

Racer leather seat for Triumph Thruxton 1200

€695.00

Racer leather seat for Triumph Thruxton 1200 (2016-...). This seat has the same shape as the optional Triumph single-seater one, with the elegance of a leather cover it will highly improve the finish level of your Triumph. The riding comfort will be the same as with your original seat, it's perfect to turn your ride into a pure cafe racer. This seat is...

View

Leather seat for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Leather seat for Royal Enfield 650 Interceptor / Continental GT

€540.00

Heritage leather seat for Royal Enfield 650 Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on a Royal Enfield seat more comfortable than the original one and so it remains compatible with your motorcycle. It has the same shape as your original seat, but covered with leather which will give...

View

Triumph

Tracker kit for Triumph Street Twin / T100 (2016)

€6,600.00

Our craftsmen designed this kit to turn the Triumph Street Twin and Bonneville T100 (2016-...) into Trackers. Our work focused on the aesthetic asked as much as on the handling to make these machines more exciting. Compact, clear-lined, aggressive... Many superlatives that will make your machine stand out from the mass once this kit is assembled on. Build...

View

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Universal motorcycle front headlight brackets

Parts

Universal motorcycle front headlight brackets

€129.00

Mounting brackets for front motorcycle headlight, ø180mm, with lateral fixings for ø8mm bolts. They measure 85mm in length and are only available for ø41mm fork tubes. You can choose the option with two indicator mounting brackets, ø8mm or ø10mm (or none). Collars and bolts are made of stainless steel, and the brackets are made of aluminum, all painted...

View

BAAK | Tiny speedo with bracket for BMW NineT

Parts

Tiny speedo with bracket for BMW NineT

€375.00

Available in classic or vintage dial, this gauge is ideal to streamline the cockpit of your NineT. We pre wire everything for a completely Plug & Play solution.

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

BAAK | Chrono speedo with bracket for BMW NineT

Parts

Chrono speedo with bracket for BMW NineT

€648.00

Available in white or black dial, this gauge is ideal to streamline the cockpit of your NineT. We pre wire everything for a completely Plug & Play solution. The electronic housing is as the speedo pre-wired. The speed is displayed in analogy and the rest of the informations are digitally displayed on the dial of the speedometer

View

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

€153.00

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Triumph

2Win shock absorbers for Triumph (2016)

€466.00

2 Win aluminum shock absorbers for Triumph (liquid-cooled - since 2016). These shocks are adjustable in spring preload and hydraulic.Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. Available in 340mm and 350mm length. Shock absorbers manufactured in aluminum in...

View

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€141.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Triumph

Big Body shock absorbers for Triumph (2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models (diam....

View

Beringer Classic front brake disc for Triumph Bobber 1200

Home

Beringer Classic front brake disc for Triumph Bobber 1200

€492.00

front brake disc Beringer Classic for Triumph Bobber 1200 (2017-…). These discs will allow you to give a more aesthetic and elegant look to your front wheel while reducing the weight thanks to the aluminum hub. sold per unit - Provide 2 units for a double disc braking.

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

€33.00

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

View

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

Bmw

Aluminium wheel arch for BMW NineT

€125.00

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

Chrome front headlight for classic motorcycle ø180mm - vintage look

Chrome front headlight for classic motorcycle ø180mm - vintage look 2

Parts

Round chrome front headlight for classic motorcycle

€75.00

Round front headlight for classic motorcycles, featuring side mounting M8 and a diameter of Ø180mm. It stands out with a 100% chrome metal housing and bezel, along with a plastic lens, offering an exceptional level of finish. Its streamlined housing gives it a distinctly classic look. Available in a universal version, compatible with any motorcycle. Made...

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

€466.00

2 Win aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. Available in 355mm (short stroke) and 360mm size (original...

View