Parts

Showing 421-432 of 441 item(s)

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Turn indicators wiring harness for BMW NineT

Parts

Turn signal wiring harness for BMW R NineT

Turn signal wiring harness for BMW R NineT. These adapters allow you to connect any 10W universal turn signal to the original wiring harness of your BMW R NineT without cutting or soldering any wire. Supplied in pairs. Total length 360mm.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Leather care cream

Leather care cream 2

Parts

Leather care cream

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Clamps for exhaust wrap

Clamps for exhaust wrap 2

Parts

Clamps for exhaust wrap

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Horn center for Austin Mini (1967-2000)

Horn center for Austin Mini (1967-2000) 2

Parts

Horn center for Austin Mini (1967-2000)

Aluminium cast steering wheel center for Austin Mini (1967-2000): Fits steering wheels with 9 M4 screws (here a Moto Lita), the center-to-center distance between adjacent screws is 35mm. The finish is deliberately raw cast aluminium, which gives this steering wheel center a distinctive character. Supplied with all necessary stainless steel fasteners.

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-20%

Triumph

Classic side covers for Triumph (pre-2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (pre-2016 - air-cooled), made from aluminium and available in Brushed or Satin Black finish. These covers replace your original plastic side covers. They give your machine a bolder look while concealing the air box. Supplied with the necessary mounting hardware. Available for right or left side.Made in France

View

Aluminium side covers for Triumph (2016-...)

Aluminium side covers for Triumph (2016-...) 2

-20%

Triumph

Classic side covers for Triumph (after 2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at the workshop in France. These covers replace the original side covers of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting screws. Available in Brushed or Satin Black finish. Dimensions: 265 x...

View

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9 2

Moto Guzzi

Starter cover for Moto Guzzi V7 and V9

Starter cover for Moto Guzzi V7 and V9. Made from aluminum, this starter cover simply mounts over the part to dress it. Available in Satin Black (epoxy) or Brushed finish. This cover is compatible with the Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.

Motogadget M-Tri for Triumph (pre- 2016)

Motogadget M-Tri for Triumph (pre- 2016) 2

Triumph

M-tri Motogadget control unit for Triumph (before 2016)

M-TRI multiplexing unit manufactured by Motogadget for Triumph Bonneville, Scrambler, Thruxton EFI from 2011 to present (electronic speedometer). Essential to remove the original speedometer, because without it the motorcycle will not start. This unit restores all original functions and allows fitting any speedometer. It is the unit used in the...

View

1
…
35
36
37