Parts

Showing 49-72 of 128 item(s)

Radiator side panels - Fantic Caballero 2

-20%

Caballero 125-250-500

Radiator side panels - Fantic Caballero

Time left

Radiator side guards for Fantic Caballero Protect your radiator with these protective side guards specifically designed for the Fantic Caballero 500. Made from brushed aluminium. Sold as a pair. They integrate harmoniously with the Caballero’s design and can be paired with other accessories for a more assertive look. Compatibility: Caballero 125-250-500...

Classic Rear Fender Kit - Fantic Caballero

Classic Rear Fender Kit - Fantic Caballero 2

-20%

Home

Rear Fender Kit Classic - Fantic Caballero

€278.40 €348.00

Time left

Rear classic fender for Fantic Caballero in stainless steel. Its molded end gives it a classic, elegant look. It provides good protection against spray from the rear wheel. Equipped with a Bates LED taillight (CE approved), a license plate light (CE approved) plug&play, a license plate bracket, optional rear turn signal mounts, a wheel arch and its...

View

High front fender kit - Fantic Caballero

High front fender kit - Fantic Caballero 2

-20%

Home

High front fender kit - Fantic Caballero

€199.20 €249.00

Time left

High front fender for Fantic Caballero. This stainless steel scrambler-style front fender mounts in a high position on the lower triple clamp of your machine using our specific mounting plate. It provides good protection and guarantees a finished off-road look. Available in 3 different finishes (Brushed, Gloss Black, Satin Black). This kit reduces the...

View

Bates headlight plate - Fantic Caballero

Bates headlight plate - Fantic Caballero 2

-20%

Home

Bates headlight plate - Fantic Caballero

€110.40 €138.00

Time left

Bates-style headlight plate for Fantic Caballero. This aluminium plate discreetly hides the steering column and the cables routed there after fitting a lower-mount Bates headlight to your machine. It is secured to your fork tubes by four leather straps in black, brown, chocolate or gold. Available in satin black and brushed aluminium finishes....

View

Original speedometer bracket for Fantic Caballero

Original speedometer bracket for Fantic Caballero 2

-20%

Home

Original speedometer bracket for Fantic Caballero

€39.20 €49.00

Time left

Original speedometer bracket for Caballero. This accessory allows you to move your speedometer to the rear of the handlebars to visually clear the front of your machine. It then sits above the tank. Your original speedometer becomes more discreet — a simple solution to give your Fantic an original look. Compatibility: Caballero 125-250-500 from 2018...

Contact switch relocator - Fantic Caballero

Contact switch relocator - Fantic Caballero 2

-20%

Home

Contact switch relocator - Fantic Caballero

€23.20 €29.00

Time left

Relocated ignition switch bracket for Caballero 500. This kit allows you to relocate your key ignition switch from its original position under the fuel tank of your Fantic. Relocating your key ignition switch will result in the loss of your motorcycle's steering lock system.

Headlight bracket Bates - Fantic Caballero

-20%

Home

Headlight bracket Bates - Fantic Caballero

€19.20 €24.00

Time left

Bates headlight mounting plate for Fantic Caballero. This plate mounts to your lower triple clamp and allows fitting a Bates headlight with bottom mount to your machine. Made from 4mm thick stainless steel. Satin black epoxy paint. Caballero 125-250-500 from 2018 onwards + All versions except Flat Track

Home

Biltwell Recoil handlebar grips

€22.00

Handlebar grips Biltwell Recoil right and left, for characterful motorcycles. Provide a good grip on the handlebar, perfect comfort and an incomparable look compared with the original. For 1" (ø25.4mm) or ø22mm diameter handlebars. Supplied in pairs. Available in black only. Without flange for a cleaner handlebar look.

View

Home

Universal number plate

€29.00

Universal license plate in aluminum. Dimensions width 315 mm height 210 mm. Hardware not supplied.

Parts

Clamps for fork gaiters

€14.00

Pack of 4 self-locking clamps in STAINLESS STEEL, allows the mounting of our leather fork gaiters for a perfect and discreet finish.

Headlight Protection Grill Classic Moto - Universal

-20%

Universal

Classic Headlight Protection Grill - Universal

€72.00 €90.00

Time left

Handmade stainless steel headlight grille – the perfect blend of protection and classic style for your motorcycle Crafted with care in our workshop in France, this 3mm stainless steel headlight grille, finished in satin black epoxy paint, provides durable, optimal protection for your headlight while asserting a timeless style. Designed to respect classic...

Parts

Breather only ø15mm Universal

€36.00

This crankcase breather filter allows you to remove any original airbox. You can fit it at the end of the original rubber hose or directly onto your engine casing.

Parts

Breather only ø10mm Universal

€36.00

This breather filter lets you remove any original airbox. You can install it at the outlet of the original rubber hose or directly on your engine crankcase.

Parts

Wire doubler

€9.60

The wire doubler allows you to have an additional connection point. Compatible with all BAAK wiring harnesses.

Accessory bracket for 41mm fork tube - Universal

Accessory bracket for 41mm fork tube - Universal 2

-20%

Parts

Accessory bracket for 41mm fork tube - Universal

€36.00 €45.00

Time left

This aluminum bracket mounts to your original fork tube to allow you to attach accessories such as a speedometer, GPS, switch, etc. Compatible with all ø41mm forks. M8 thread.

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

MOTO SHINE 742 - Motorcycle waterless cleaner

maintenance

MOTO SHINE 742 Wax Cleaner - Fictech (500 mL)

€15.00

Waterless Wax cleaner specially designed for motorcycles. Cleans and shines without scratching paint, chrome, stainless steel, carbon and plastic parts of your motorcycle. Removes dirt, dust and the dull film that forms over time on glossy surfaces. Thanks to its carnauba wax formulation, the Shine 742 restores surface shine and provides hydrophobic...

maintenance

Complete motorcycle cleaning kit

€65.00

The ultimate kit to clean and maintain your motorcycle. MOTO SHINE 742: Motorcycle wax cleaner (waterless) MOTO GRIME 136: Cleaner specially for your motorcycle chain, sprocket, transmission MOTO MATT 741: Quick detailer for motorcycles, Matte finish MOTO WASH 116: Fast cleaner/degreaser for motorcycles. Microfiber Included

Quad Lock Pro Aluminium Threaded Rod Motorcycle Phone Holder

Quad Lock Pro Aluminium Threaded Rod Motorcycle Phone Holder 2

Parts

Motorcycle Phone Mount with Threaded Stem Quad Lock Pro

€64.99

Give your motorcycle the best smartphone mount with the Quad Lock Pro Aluminum. Carefully selected by the BAAK Workshop team for its clean design, this mount is the brand's most premium version. (Pro Version) The Quad Lock threaded-stem mount replaces one of the handlebar clamp screws (M8) on your motorcycle for a perfectly integrated solution....

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK 2

Parts

Phone mount for motorcycle Quad Lock Pro - handlebar mounting

€70.00

Give your bike the best smartphone mount with the Quad Lock Pro Aluminium. Carefully selected by the BAAK Workshop team for its sleek design, this mount represents the brand's most premium Quad Lock offering. Easy and quick installation on your handlebars. Manufacturer reference: QLM-HBR-PRO

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

€66.00

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

€78.00

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Long universal front headlight brackets for motorcycle

Long universal front headlight brackets for motorcycle 2

-20%

Parts

Long universal front headlight brackets for motorcycle

€103.20 €129.00

Time left

These motorcycle headlight mounting brackets are 85mm long and are available for fork tubes in Ø39-40mm as well as Ø41-42mm. Headlight mounting bolts are M8. You can choose the option with two turn signal mounting tabs, ø8mm or ø10mm (or without mounts). Clamp and bolts in stainless steel, brackets in machined aluminium, all painted in satin black epoxy...

View