Parts

Showing 289-300 of 311 item(s)

Bates taillight

Bates taillight 2

Universal

Bates taillight

Bates type universal LED taillight for motorcycle. This universal black light can be assembled on your rear mudguard. The fixation enable you to adjust the angle of the taillight. Available with a black housing and your choice for the trim ring: satin black, brushed or chromed.ø50mm diameter. This taillight is EU approved.

View

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn indicators wiring harness for Triumph (2016)

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Turn indicators wiring harness for BMW NineT

Parts

Turn indicators wiring harness for BMW NineT

Turn indicators wiring harness for BMW R NineT. These connectors enable you to connect any universal 10W turn indicators to the original wiring harness of your BMW NineT without having to cut or solder any wire. Comes in pair. Total length: 360mm (14")

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Leather Conditioner

Leather Conditioner 2

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Universal 3 buttons control

Universal 3 buttons control 2

Parts

Left 3-buttons universal switch

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

Universal 1 button control

Universal 1 button control 2

Parts

Universal 1 button control

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

View

Stainless steel collars for exhaust wrap

Stainless steel collars for exhaust wrap 2

Parts

Stainless steel collars for exhaust wrap

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Short fork spring blocks

Short fork spring blocks 2

-15%

Parts

Short fork spring blocks

€16.15 €19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

View

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-35%

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€48.75 €75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

View

Aluminium side covers for Triumph (2016-...)

Aluminium side covers for Triumph (2016-...) 2

-35%

Triumph

Classic aluminum side covers for Triumph (2016)

€48.75 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

1
…
24
25
26