Parts

Showing 25-48 of 140 item(s)

Handlebar Controls – Universal

Brake sensor for Beringer master cylinder

Brake sensor specific to Beringer front brake master cylinders.This sensor allows the rear brake light to be triggered when braking. Sensor type: normally closed Attention: returns are not accepted on Beringer products.

Handlebar Controls – Universal

Clutch sensor for Beringer control

€13.20

Clutch sensor specific to Beringer clutch master cylinders. Sensor type: normally open Notice: returns are not accepted on Beringer products.

Hydraulic brake sensor M10x1.25 - Universal

Handlebar Controls – Universal

Hydraulic brake sensor M10x1.25 - Universal

€16.20

Universal hydraulic brake sensor M10x125. Installs on your front brake master cylinder or on your hydraulic proportioning block depending on your configuration. Two variants available: Single banjo: If you only have one banjo fitting to attach. Double banjo: If you have two banjo fittings to attach. Compatible with Kustom Tech master cylinders. Note: Not...

View

Handlebar Controls – Universal

Replacement lever for Kustom Tech master cylinder

€150.00

This replacement lever is only compatible with our Kustom Tech front brake master cylinder.

Handlebar Controls – Universal

Replacement lever for Grimeca / BAAK front brake master cylinder

€78.00

This replacement lever is only compatible with our Grimeca / BAAK front brake master cylinder.

Handlebar Controls – Universal

Rebuild kit for Kustom Tech or Grimeca brake master cylinder

€52.20

This rebuild kit for the brake master cylinder Kustom Tech or Grimeca will allow you to renew all seals and the piston of your master cylinder. Variants: Master cylinder: Grimeca or Kustom Tech Piston diameter: ø 12 mm or ø 14 mm

View

Handlebar Controls – Universal

Half switch housing mirror mount for Beringer controls

€64.80

This half clamp allows mounting of mirrors with M10x125 right-hand threads (threading like a standard bolt) directly onto your Beringer lever assembly. Compatible only with clutch and front brake master cylinders from Beringer. This bracket is compatible with all our Ø8 and Ø10 mirrors. Available in black only. Note, the part is not symmetrical — be...

View

Fantic

BAAK number plate - Fantic Caballero

€29.00

Number plate for Fantic Caballero in brushed stamped aluminium. Easily fits on the original side covers by re-drilling them. Number plate dimensions: 260 x 180 mm, mounting hole spacing: 179 mm Supplied with two screws and nuts. BAAK exclusive.

Turn signal brackets on license plate bracket - Fantic

Caballero 125-250-500

Turn signal brackets on license plate bracket - Fantic

€30.00

Turn signal mounts for license-plate bracket. These stainless steel turn signal mounting plates attach to your BAAK license-plate bracket for your Fantic Caballero. They are available in 3 versions : For turn signals with øM8 stem For turn signals with øM10 stem For original Fantic Caballero turn signals Supplied with stainless steel fasteners.

View

Universal

Universal BAAK number plate

€29.00

Universal number plate in embossed brushed aluminum. Easily fits any bracket or a side cover. Number plate dimensions: 260 x 180 mm, mounting hole spacing: 179 mm Supplied with two screws and nuts. BAAK exclusive.

Universal

Universal single US-style license plate bracket for bare rear fender

€22.80

This license plate bracket is designed for US-format (horizontal) plates. It is made from 3 mm thick aluminum, painted with satin black epoxy paint. It can be mounted directly to a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. Overall dimensions: 96 mm (height), 169 mm (width)

Universal

Universal US license plate bracket with lighting mount for bare rear fender

€45.00

This plate bracket is suited to US-format license plates (horizontal). It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender thanks to its supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows mounting a license plate light with M6 or M8 fittings. Overall...

Universal

EU plate bracket with universal tab for bare rear fender

€45.00

This license plate bracket is designed for European-format license plates. It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows fitting a license plate light in M6 or M8. Bracket dimensions...

Universal

Universal EU plate bracket for bare rear fender

€45.00

Center-to-center of the mounting holes 45 mm in M5. The necessary stainless hardware is supplied. You can fit this plate bracket to the rear fender of your choice. It can be mounted directly to a fender thanks to the supplied plate. You can install it elsewhere by adapting it to your needs. It is made from 3 mm thick aluminium, painted with satin black...

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

Caballero 125-250-500

Short license plate bracket kit for Fantic Caballero

€108.00

License plate bracket kit for Fantic Caballero. The bracket is painted satin black epoxy and allows reinstallation of your motorcycle's original license plate light. Compatible with Caballero 125, 250 and 500 from 2018 to 2023 + All versions except Flat Track This license plate bracket kit is not compatible with models from MY 2024 onwards.

Headlight protection grill Heritage - Universal

Headlight protection grill Heritage - Universal 2

-20%

Parts

Headlight protection grille Héritage - Universal

€72.00 €90.00

Time left

This 3mm thick headlight grille in stainless steel is finished with a satin black epoxy paint, providing excellent protection for your headlight. It fits perfectly with our Phare Heritage but can also fit many OEM and aftermarket headlights (180mm diameter) thanks to the supplied spacers. Contains: - One headlight grille - Two 10mm thick spacers - Two...

Universal

Classic headlight with integrated motogadget Chronoclassic 2 speedometer - Universal

€1,368.00

Headlight with integrated Chronoclassic 2 speedometer Universal. The headlight has a satin black metal shell Ø180mm and features M8 side mounts. The speedometer is manufactured in Germany by Motogadget. It is very easy to program according to your wheel diameter. The headlight is CE approved and the speedometer is CE and TÜV approved. Fitting the...

View

Caballero 125-250-500

Leather seat Fantic Caballero

€840.00

This leather saddle changes the look of your Fantic Caballero 125, 250 and 500 (all versions except Flat Track) without sacrificing comfort. It brings a Vintage Trail / Enduro style, redefines the machine’s silhouette and stands up to the miles, from daily commutes to long tours. The top of the saddle is made of suede leather, providing excellent rider...

View

Performance Green Filter air filter, original-style, for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Performance Green Filter air filter, original-style, for Royal Enfield 650 Interceptor...

€69.00

Optimize your motorcycle’s performance with this Green filter sport air filter, crafted from double-layer oiled cotton for increased airflow and optimal filtration. Easy maintenance with the Green filter kit (optional). Easy to install: directly replaces the original filterMore power, more torque, lower fuel consumptionWashable and reusable for lifeMade...

maintenance

Air filter service kit (export version)

€24.90

Maintenance kit for washable air filters. Take care of your air filter and extend its performance with this complete GreenFilter maintenance kit. It contains everything needed to clean and re-oil your filter at each service, ensuring optimal airflow and effective filtration. Not suitable for original-style air filters, which must be replaced.

maintenance

Air filter maintenance kit (France version)

€13.20

Maintenance kit for washable air filters Take care of your air filter and extend its performance with this complete maintenance kit. It contains everything needed to clean and re-oil your filter at each service, ensuring optimal airflow and consistently effective filtration. Not suitable for factory-type air filters, which must be replaced.

Triumph

Performance OEM-style air filter for Triumph (after 2016) - Green Filter

€65.00

Optimize your motorcycle’s performance with this Green filter sports air filter, made from double-layer oiled cotton for higher airflow and optimal filtration. Simple maintenance with the Green filter kit (optional). Easy fit: directly replaces the OEM filterMore power, more torque, lower fuel consumptionWashable and reusable for lifeMade in France

Caballero 125-250-500

Engine guard Trail - Fantic Caballero

€138.00

Trail engine guard in aluminum for Fantic Caballero. In addition to giving your Fantic an adventurous look, this engine guard provides effective protection for the lower engine in all conditions. Made from 3 mm thick aluminum, it serves as a true shield against splashes, stones and impacts associated with committed off-road use. Easy to fit, this engine...

View

Round turn signals in aluminum 21W - BAAK

Round turn signals in aluminum 21W - BAAK 2

Parts

Turn signals Round 21W

€69.00

Mini Round turn signals in aluminum, 40mm diameter, with 21W bulbs and M10 mounting stem. These turn signals have a very fine finish for a subtler look than most stock indicators. Be careful to respect polarity when connecting: Black wire: + Black/white wire: - Sold in pairs. EU approved. Click here if you want the 5W LED version.