Parts

Showing 25-48 of 215 item(s)

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

Say goodbye to excessive lean on your Royal Enfield 650 Interceptor or Continental GT (2018-...) This kickstand extends the length of your original kickstand by 20 mm. Perfect for bikes with upgraded shocks or large tires, this machined aluminum accessory finished in satin black epoxy is durable and elegant. Made in France

Parts

Mini LED turn signal mo.blaze Pin

€54.00

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Home

Micro LED turn signal mo.blaze Tens1

€49.42

Motogadget LED micro indicator – a minimalist design in aluminum with Ø8mm mounting stem. The mo.blaze tens by Motogadget is one of the smallest road-legal indicators in the world. Each indicator is crimped in our workshop with Japanese connectors to simplify installation on your bike. Available in Black or Polished aluminum finish. Indicator dimensions:...

View

Moto Guzzi

Pack leather tank strap + Monza gas cap Moto Guzzi V7 III / V9

€240.00

The leather tank strap and Monza cap pack is the perfect assembly for your Moto Guzzi V7 III & V9. Combine the vintage style of the Monza cap with the handcrafted elegance of the brown leather strap for a unique look. Made in France.

View

Home

M8 indicator brackets for Ø56 fork tube

€30.00

Pair of front turn signal brackets for 56mm fork tubes — simple, effective, and above all, very discreet. Made of stainless steel with rubber protection strip. These brackets are compatible with: Caballero 125-250-500 from 2018 onward — all versions Sold as a pair Turn signals not included.

Air filters for Royal Enfield 650 Interceptor / Continental GT

Home

Air filters for Royal Enfield 650 Interceptor / Continental GT

€108.00

This pair of air filters will give your machine a retro aesthetic while maintaining perfect filtration quality. They are notably included in our air box removal kits. This kit includes: 2 air filters a breather Made in France, exclusively for BAAK.

Home

Biltwell Recoil handlebars

€22.00

handles of handlebars Biltwell right and left, for motorcycle motorcycles. Allows good handlebars, perfect comfort and an incomparable look at the origin. for handlebar in diameter 1 "(Ø25.4mm) or Ø22mm. Delivered by pairs. Available only in black. without a collar for a more refined look.

View

Home

Universal aluminum number plaque

€29.00

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Stainless steel necklace for fork bellows

Parts

Stainless steel necklace for fork bellows

€14.00

batch of 4 self-stainless steel necklaces, allows the assembly of our leather fork fork bellows for a perfect and discreet finish.

Classic Moto - universal flagship protection grid

Classic Moto - universal flagship protection grid 2

Parts

Classic headlight - universal protective grid

€90.00

Handcrafted stainless steel headlight grille – The perfect combination of protection and classic style for your motorbike Crafted with passion in our workshop in France, this 3mm thick stainless steel headlight grille, coated with satin black epoxy paint, offers optimal and durable protection for your headlight, while asserting a timeless style. Designed...

Interceptor / Continental GT 650

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

€495.00

Give your motorcycle a Roadster look by freeing up the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox removal kit. This kit creates a hollow space, visually lightening the motorcycle. The air filters will no longer be hidden, revealing their function. This kit includes: 2 air filters 1...

Parts

Breather only Ø15mm

€36.00

This breather filter allows you to remove any original airbox. You can install it at the outlet of the original rubber hose or directly on your engine crankcase.

Parts

Breather only Ø10mm

€36.00

This breather filter allows you to remove any original airbox. You can install it at the outlet of the original rubber hose or directly on your engine crankcase.

Parts

VANS 22mm Handlebar Grips

€28.80

Vans handlebar grips for motorcycles, right and left. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 22mm diameter, also available below in ø25mm. Sold in pairs.

Royal Enfield

Rear Wiring Harness Only for Royal Enfield 650

€19.00

This wiring harness allows you to connect an aftermarket turn signal and rear light assembly to your Royal Enfield 650. It is plug & play with the original connectors of your bike. Available in short and long sizes. Designed and manufactured by our team at the BAAK workshop.

Parts

Wire Splitter

€9.60

The wire splitter provides you with an additional connection point. Compatible with all BAAK wiring harnesses.

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

€694.00

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Parts

BSA Gold Star Leather Tank Strap

€125.00

Leather tank strap designed for BSA Gold Star 650 tanks. It enhances your tank's appearance with a refined look while protecting it from scratches. Made in France

View

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

View

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor

€36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Parts

41mm Fork Tube Clamp Universal

€45.00

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

Short seat kit rear loop for Royal Enfield 650

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

€198.00

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat