Parts

Showing 169-192 of 220 item(s)

BAAK Turn indicators brackets kit for Triumph Bobber 1200

Parts

Turn indicators brackets kit for Triumph Bobber 1200

This kit allows you to relocate the indicators of your Bobber 1200 and thus purify its line. The rear indicators incorporate the brake lights.

Rear BAAK wiring harness for Triumph Bobber 1200

Rear BAAK wiring harness for Triumph Bobber 1200 2

Parts

Rear wiring harness for Triumph Bobber 1200

€39.00

These connectors enable you to connect any item 10W to the original wiring harness of your Bobber 1200 without having to cut or solder any wire.

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

€915.00

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

€765.00

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE.

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium.Attaches to replace the original side covers of your Triumph 1200 XC or XE.

Parts

Leather keychain

€19.00

This leather keychain is handcrafted by our craftsmen in the same leather from which we manufacture our seats, saddlebags, etc... Simple and elegant, just as our motorized creations. It's available in Brown, black, gold or ruby (red) leather). The BAAK logo is hot-pressed on the keychain. You can attach your keys to it thanks to the ring, the...

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Large bag holder for Triumph short seat kit (2016 - ...)

Home

Large bag holder for Triumph short seat kit (2016 - ...)

€240.00

Turn indicators holdersDesigned for our large removable rolled pannier or messenger bag, this bracket is compatible with our Triumph Short Seat Kit (2016-...). This bracket is designed to accommodate one or two large panniers if you have a BAAK short seat kit. We've obviously designed it so that the pannier doesn't get in the way of the passenger. The...

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Parts

Radiator guard for Triumph (2016)

€84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

€95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Flat Triple Clamp for Triumph Thruxton R/RS in Aluminum - Satin Black Epoxy Finish | BAAK Motocyclettes

Flat Triple Clamp for Triumph Thruxton R/RS in Aluminum - Satin Black Epoxy Finish | BAAK Motocyclettes 2

Parts

Flat triple trees for Triumph Thruxton R and RS

€540.00

Designed for the Triumph Thruxton R and RS, this flat triple clamp lowers the front of your bike while retaining the original ignition switch and gauge mount. Crafted from CNC-machined aluminum, it features a premium satin black epoxy finish for a sleek and luxurious look. Note that this triple clamp is not compatible with the Speed Twin 1200. Made in...

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedo for Triumph (2016)

€966.00

The Daytona mini speedometer is compatible with the original handlebar clamps. of modern Triumphs (T120, T100, Speed Twin 900, Scrambler 900) and is a 100% plug and play accessory. Pre-wired in our workshop, it's easy to fit without any modifications and is available in km/h or miles versions. Only compatible with original handlebar clamps. Made in France.

Plug and play headlight for Triumph (2016...)

Parts

Plug and play headlight for Triumph (2016...)

€27.00

Looking to customize your Triumph (2016 and up) without the hassle? This plug and play front headlight pilot light makes it super easy. With a connector fully compatible with your original wiring, you can install an adaptable headlight in no time. Perfect for café racer, scrambler, or bobber projects, it ensures a clean, simple setup. Made in France.

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

Parts

Flat triple trees Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

Removable windshield for Triumph Bonneville T100 / T120

Parts

Removable windshield for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Extension for Classic ø10 round motorcycle mirror in aluminium

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.