French Days

BAAK's autumn selection: our hero pieces and the leather crafted in Lyon. Seats, bags, jackets — the material takes on its patina, the machine gains character.

Showing 1-17 of 17 item(s)

Universal reflector for license plate

Universal reflector for license plate 2

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original Moto Guzzi V7 III / V7 850 / V9 headlight

€103.20 €129.00

Time left

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight brackets, compatible with original LED and bulb headlights.60 mm long with 39–40 mm mounting clamps, they also allow installation of aftermarket turn signals. Satin black epoxy finish, delivered in pairs with stainless steel fasteners for a simple and robust...

View

Brushed stainless steel engine guard V7 III - V7 850 - V9

Brushed stainless steel engine guard V7 III - V7 850 - V9 2

-20%

Parts

Engine guard for Moto Guzzi V7 850 / V9

€79.20 €99.00

Time left

Protect the engine of your Moto Guzzi V7 850 or V9 with this stainless steel engine guard. Available in two finishes: brushed or high-quality satin black epoxy paint. Durable, attractive, and easy to fit with the included hardware, it delivers a badass look while remaining practical. An accessory as useful as it is essential for riding with peace of...

View

Fork spring shims +15mm Moto Guzzi V7 850

Fork spring shims +15mm Moto Guzzi V7 850 2

-15%

Parts

Fork spring shims +15mm Moto Guzzi V7 850

€26.35 €31.00

Time left

This pair of stainless fork spring shims raises the front of your V7 850 by 15mm, notably so your motorcycle retains a similar stance if you fit our Big Body 390mm shocks. These shims are fitted simply in addition to the original fork spring shims. sold in pairsMade in France

Side covers for Moto Guzzi V7 850

Side covers for Moto Guzzi V7 850 2

-20%

V7 850

Side covers for Moto Guzzi V7 850

€60.00 €75.00

Time left

Easy to fit, the cover replaces the original plastic side cover of your motorcycle. It brings a higher level of finish to your Moto Guzzi. These aluminum side covers are available in satin black epoxy or brushed finish. The left side cover allows the seat-lock system keyhole to remain visible. They are notably used in the manufacturing of our leather...

View

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-20%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€158.40 €198.00

Time left

Side covers for Triumph Scrambler 1200 XC/XE in aluminum. Mounts as a direct replacement for the original side covers of your Triumph 1200 XC or XE.

View

Side covers (for original high exhaust line) Triumph Srambler 1200 X/XC/XE

Side covers (for original high exhaust line) Triumph Srambler 1200 X/XC/XE 2

-20%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust line) Triumph Scrambler 1200 X/XC/XE

€158.40 €198.00

Time left

Optimize your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers specially designed for the stock high exhaust line. They not only improve heat protection but also add a dynamic touch to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetic solution. Easy to install, they mount directly in...

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

US license plate bracket with integrated stop-light bracket

US license plate bracket with integrated stop-light bracket 2

-20%

Parts

US license plate bracket with integrated stop-light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format license plates (horizontal 170x100mm). It is made from 3mm thick aluminium, painted with satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit US plates. It is compatible with this Vintage Tail Light. Made in France

Land Rover Defender Headlight Surround

Land Rover Defender Headlight Surround 2

-20%

Land Rover Defender

Headlight surrounds for Land Rover Defender

€112.00 €140.00

Time left

The headlight surrounds for the Land Rover Defender complete our range of Defender body accessories, and in particular the BAAK grille.They give it a unique character: raw and classic at the same time. The smooth finish and stretched lines of these pieces are the result of a clean design, in keeping with the Defender’s timeless look. They are made with...

View

Classic vintage Land Rover grille

Classic vintage Land Rover grille 2

-20%

Land Rover Defender

Front grille for Land Rover Defender

€199.20 €249.00

Time left

The grille for the Land Rover Defender is the signature piece of our Defender bodywork accessories range. This range was conceived by our Design department and engineering office to allow you to customize your Defender. It gives it a unique character: raw and classic at once. The smooth finish and elongated lines of this piece are the result of a clean...

View

Bates headlight plate for BMW R NineT

Bates headlight plate for BMW R NineT 2

-20%

BMW

Bates headlight plate for BMW R NineT

€135.20 €169.00

Time left

Bates headlight plate for BMW R NineT. This aluminium plate hides the steering column and cables after fitting a Bates headlight on your BMW R 1200 NineT. Made from aluminium, it is available in Satin Black or Brushed Aluminium finishes. Compatible with Bates headlight and original headlight. Leather mounting straps with metal buckle are available in 4...

View

Aluminum rear hugger for BMW NineT | BAAK

Aluminum rear hugger for BMW NineT | BAAK 2

-20%

BMW

Rear hugger for BMW NineT

€100.00 €125.00

Time left

Aluminum fender delete kit for BMW R 1200 NineT. This rear hugger allows you to give your machine a flawless level of finish once the rear fender is removed. It is equipped with an integrated LED taillight and supplied with its plug & play wiring harness for the taillight, and its stainless steel mounting kit. Compatible with BMW NineT Standard,...

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Front mini fender for Moto Guzzi V7 and V9

Front mini fender for Moto Guzzi V7 and V9 2

-20%

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

€132.00 €165.00

Time left

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

OUTLET - Front fender Medium for Moto Guzzi V7 and V9 2

-20%

Products

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

€85.20 €106.50

Time left

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made from stainless steel. It is short but long enough to protect you from front wheel spray. It is pre-drilled to fit the mounting system of your original fender Designed and handcrafted by our artisans at the workshop in France. Dimensions: 410x125mm.Made in France

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.