French Days

BAAK's autumn selection: our hero pieces and the leather crafted in Lyon. Seats, bags, jackets — the material takes on its patina, the machine gains character.

Showing 1-17 of 17 item(s)

Rear brake caliper protector Triumph

Rear brake caliper protector Triumph 2

-20%

Triumph

Rear brake caliper protector Triumph

€28.80 €36.00

Time left

Protect your rear brake caliper with this stainless-steel guard specially designed for Triumph motorcycles. The rear caliper on your Triumph sits below the wheel axle and is therefore highly exposed to stone impacts off-road and to curbs in town. This caliper guard is specifically shaped to cover the caliper and reduce the risk of damage from impacts....

View

Universal reflector for license plate

Universal reflector for license plate 2

-20%

Home

Universal reflector for license plate

€7.92 €9.90

Time left

Black finish, mounts on license plate bracket or directly on the license plate.

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

-20%

Parts

US license plate bracket with license plate light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

US license plate bracket with integrated stop-light bracket

US license plate bracket with integrated stop-light bracket 2

-20%

Parts

US license plate bracket with integrated stop-light bracket

€18.24 €22.80

Time left

This license plate bracket is suited to US-format license plates (horizontal 170x100mm). It is made from 3mm thick aluminium, painted with satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit US plates. It is compatible with this Vintage Tail Light. Made in France

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

Land Rover Defender Headlight Surround

Land Rover Defender Headlight Surround 2

-20%

Land Rover Defender

Headlight surrounds for Land Rover Defender

€112.00 €140.00

Time left

The headlight surrounds for the Land Rover Defender complete our range of Defender body accessories, and in particular the BAAK grille.They give it a unique character: raw and classic at the same time. The smooth finish and stretched lines of these pieces are the result of a clean design, in keeping with the Defender’s timeless look. They are made with...

View

Classic vintage Land Rover grille

Classic vintage Land Rover grille 2

-20%

Land Rover Defender

Front grille for Land Rover Defender

€199.20 €249.00

Time left

The grille for the Land Rover Defender is the signature piece of our Defender bodywork accessories range. This range was conceived by our Design department and engineering office to allow you to customize your Defender. It gives it a unique character: raw and classic at once. The smooth finish and elongated lines of this piece are the result of a clean...

View

Airbox removal kit for Triumph T120 (after 2016)

Airbox removal kit for Triumph T120 (after 2016) 2

-20%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (after 2016)

€224.00 €280.00

Time left

Airbox deletion kit for Triumph Bonneville T120 (2016-...). This kit cleans up the lines of your machine and frees the engine constrained by the very heavy original airbox. This kit includes: The battery tray in aluminium (Satin Black only) The pair of "camembert" air filters The pair of aluminium side covers (Black or Brushed) with or without leather...

View

Headlight plate for Bates headlight Triumph (2016-...)

Headlight plate for Bates headlight Triumph (2016-...) 2

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

High front fender Scrambler for Triumph (2016-...)

High front fender Scrambler for Triumph (2016-...) 2

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Ignition switch relocator for Triumph (after 2016)

Ignition switch relocator for Triumph (after 2016) 2

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Bates headlight plate for BMW R NineT

Bates headlight plate for BMW R NineT 2

-20%

BMW

Bates headlight plate for BMW R NineT

€135.20 €169.00

Time left

Bates headlight plate for BMW R NineT. This aluminium plate hides the steering column and cables after fitting a Bates headlight on your BMW R 1200 NineT. Made from aluminium, it is available in Satin Black or Brushed Aluminium finishes. Compatible with Bates headlight and original headlight. Leather mounting straps with metal buckle are available in 4...

View

Aluminum rear hugger for BMW NineT | BAAK

Aluminum rear hugger for BMW NineT | BAAK 2

-20%

BMW

Rear hugger for BMW NineT

€100.00 €125.00

Time left

Aluminum fender delete kit for BMW R 1200 NineT. This rear hugger allows you to give your machine a flawless level of finish once the rear fender is removed. It is equipped with an integrated LED taillight and supplied with its plug & play wiring harness for the taillight, and its stainless steel mounting kit. Compatible with BMW NineT Standard,...

Turn signal bracket kit for original front and rear for Triumph (after 2016)

Turn signal bracket kit for original front and rear for Triumph (after 2016) 2

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

€24.00 €30.00

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

Lowering kit for Triumph (After 2016)

Lowering kit for Triumph (After 2016) 2

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.