New Products

Showing 1-12 of 28 item(s)

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

New

Home

License plate holder kit - Fantic Caballero 500

License plate holder kit for Fantic Caballero. The holder is painted in satin black epoxy and allows you to re-install the original license plate light of your motorcycle. Compatible with: Caballero 125-250-500 from 2018 to 2024 + All versions except Flat Track

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III 2

New

Home

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Remote switch bracket for Moto Guzzi V7 I / II / III. This kit allows you to relocate your key switch from its original position under the tank of your Moto Guzzi to simplify your cockpit. Relocating your key switch results in the loss of your motorcycle’s steering lock system.

Skid Plate engine guard – Fantic Caballero

Skid Plate engine guard – Fantic Caballero 2

Home

Skid Plate engine guard – Fantic Caballero

Trail-style aluminum skid plate for Fantic Caballero. In addition to giving your Fantic an adventurer look, this bash plate provides effective protection for the lower engine in all conditions. Made of 3mm thick aluminum, it acts as a real shield against debris, stones, and impacts during intense off-road riding. Easy to install, the skid plate comes with...

View

M8 indicator brackets for Ø56 fork tube

M8 indicator brackets for Ø56 fork tube 2

Home

M8 indicator brackets for Ø56 fork tube

Pair of front turn signal brackets for 56mm fork tubes — simple, effective, and above all, very discreet. Made of stainless steel with rubber protection strip. These brackets are compatible with: Caballero 125-250-500 from 2018 onward — all versions Sold as a pair Turn signals not included.

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Fork Spring blocks +15mm for Moto Guzzi V7 850

Fork Spring blocks +15mm for Moto Guzzi V7 850 2

Parts

Fork Spring blocks +15mm for Moto Guzzi V7 850

This pair of stainless steel fork spring shims allows you to raise the front end of your V7 850 by 15mm, so that your bike retains a similar ride height if you fit our 390mm Big Body shocks. These spacers are simply fitted in addition to the original fork spring spacers. sold in pairs Made in France

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

View

License plate holder for original Moto Guzzi V9 fender

License plate holder for original Moto Guzzi V9 fender 2

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

1
2
3