New Products

Showing 1-12 of 45 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Large saddlebag support for short seat kit Triumph pre-2016 2

New

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Kickstand Extension for Triumph Scrambler (pre-2016)

Kickstand Extension for Triumph Scrambler (pre-2016) 2

New

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

Say goodbye to the excessive lean of your Triumph Scrambler (before 2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the excessive tilt of the bike once parked and ensures better stability on all types of terrain. Almost essential if you have installed longer shock absorbers or larger tires than the original...

Bates headlight support - Triumph 1200 Bobber

Bates headlight support - Triumph 1200 Bobber 2

Home

Bates headlight support - Triumph 1200 Bobber

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Rear Brake Caliper Guard for Triumph

Rear Brake Caliper Guard for Triumph 2

Triumph

Rear Brake Caliper Guard for Triumph

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Side plate bracket for Triumph Bobber (2017)

Side plate bracket for Triumph Bobber (2017) 2

Parts

Side plate bracket for Triumph Bobber (2017)

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Rear mudguard for Bobber 1200

Rear mudguard for Bobber 1200 2

Triumph

Rear mudguard for Bobber 1200 Triumph

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

Parts

Trail engine protection for Triumph T100/T120

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

Royal Enfield

Rear turn indicators brackets for Royal Enfield

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

1
2
3
4