New Products

Showing 1-12 of 44 item(s)

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

New

Home

License plate holder kit - Fantic Caballero 500

License plate holder kit for Fantic Caballero. The holder is painted in satin black epoxy and allows you to re-install the original license plate light of your motorcycle. Compatible with: Caballero 125-250-500 from 2018 to 2024 + All versions except Flat Track

Large saddlebag support for short seat kit Triumph pre-2016

Large saddlebag support for short seat kit Triumph pre-2016 2

New

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III 2

New

Home

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Remote switch bracket for Moto Guzzi V7 I / II / III. This kit allows you to relocate your key switch from its original position under the tank of your Moto Guzzi to simplify your cockpit. Relocating your key switch results in the loss of your motorcycle’s steering lock system.

Skid Plate engine guard – Fantic Caballero

Skid Plate engine guard – Fantic Caballero 2

Home

Skid Plate engine guard – Fantic Caballero

Trail-style aluminum skid plate for Fantic Caballero. In addition to giving your Fantic an adventurer look, this bash plate provides effective protection for the lower engine in all conditions. Made of 3mm thick aluminum, it acts as a real shield against debris, stones, and impacts during intense off-road riding. Easy to install, the skid plate comes with...

View

M8 indicator brackets for Ø56 fork tube

M8 indicator brackets for Ø56 fork tube 2

Home

M8 indicator brackets for Ø56 fork tube

Pair of front turn signal brackets for 56mm fork tubes — simple, effective, and above all, very discreet. Made of stainless steel with rubber protection strip. These brackets are compatible with: Caballero 125-250-500 from 2018 onward — all versions Sold as a pair Turn signals not included.

Rear Brake Caliper Guard for Triumph

Rear Brake Caliper Guard for Triumph 2

Triumph

Rear Brake Caliper Guard for Triumph

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

Triumph

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

View

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

Triumph

Rectifier bracket for Triumph (pre- 2016)

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

1
2
3
4