V7 I & V7 II (2007-2017)

Showing 1-21 of 21 item(s)

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

Classic rear mudguard for Moto Guzzi V7 / V7 850

-10%

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

$305 $339

Time left

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

$109 $136

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Classic Mini front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

$98 $122

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

$149 $187

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Rear turn indicators brackets for Moto Guzzi

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

$22 $34

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Front turn indicators bracket for Moto Guzzi V7 / V9

-35%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

$22 $34

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Parts

H4 Yellow bulb

$14

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

21W turn indicators bulbs

209-405

$10

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

-40%

Parts

Headlight struts

$15 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

-15%

Parts

Bates headlight

$72 $85

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

-15%

Parts

Heritage headlight

$95 $112

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

-15%

Parts

Classic headlight

$87 $102

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

-15%

Parts

Headlight bulb wiring extension

$18 $21

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

-15%

Parts

Resistors for LED turn indicators

$14 $17

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

$20 $34

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

-15%

Parts

License plate lightning

$17 $20

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

$95 $146

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

$526

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

Parts

Turn indicators / Brake light

$177

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

$88

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....