Turning Lights

Showing 1-12 of 13 item(s)

Original Indicator Mounts on License Plate Bracket for BSA Goldstar 650

Original Indicator Mounts on License Plate Bracket for BSA Goldstar 650 2

New

Home

Original Indicator Mounts on License Plate Bracket for BSA Goldstar 650

Turn signal brackets on license plate holder. These stainless steel brackets attach to your BAAK license plate holder for your BSA Goldstar 650 motorcycle. Supplied with stainless steel screws.

Round 21W turn indicators I BAAK

Round 21W turn indicators I BAAK 2

Parts

Round 21W turn indicators

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Mini LED turn signal mo.blaze Pin

Mini LED turn signal mo.blaze Pin 2

Parts

Mini LED turn signal mo.blaze Pin

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Turn indicators / Brake light

Turn indicators / Brake light 2

Parts

Turn indicators / Brake light

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

Rear mudguard wiring harness for BMW NineT

Parts

Rear mudguard wiring harness for BMW NineT

Rear fender wiring harness for BMW R NineT. This connector enables you connect any rear taillight (light / brake light) to the original wiring harness of your BMW NineT without having to cut or weld any wire. Sold individually. Total length: 160mm. This wiring harness initially comes with all our NineT rear mudguards.

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

Triumph

Rear turn indicators brackets for Triumph

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Original turn indicators brackets kit for Triumph (2016)

Original turn indicators brackets kit for Triumph (2016) 2

Triumph

Original turn indicators brackets kit for Triumph (2016)

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi 2

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn indicators wiring harness for Triumph (2016)

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

1
2