Universal

Showing 73-89 of 89 item(s)

Universal Mini front mudguard

Universal Mini front mudguard 2

-20%

Parts

Universal Mini front mudguard

€91.20 €114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Universal Medium front mudguard

Universal Medium front mudguard 2

-20%

Parts

Universal Medium front mudguard

€91.20 €114.00

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

View

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Universal Classic Mini front mudguard

€81.60 €102.00

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

View

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Universal Classic Medium front mudguard

€91.20 €114.00

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

View

Universal Short rear mudguard

Universal Short rear mudguard 2

-20%

Universal

Universal Heritage rear mudguard

€312.00 €390.00

Heritage Universal rear mudguard manufactured out of stainless steel. It keeps a classic spirit, but more purified than most of original mudguards while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license plate lightning and a license plate holder.Made in France

View

Vintage taillight

Vintage taillight 2

Parts

Vintage taillight

Vintage motorcycle universal taillight manufactured out of steel. This Ø65mm diameter LED light includes a license plate lightning under the light. Made in durable steel and then powder coated in black this tail light is available with or without the "STOP" brushed insert. Much more discreet than most of the factory taillights, and a will give your bike...

View

Old School taillight

Old School taillight 2

Universal

Old School taillight

Old school LED universal motorcycle taillight with integrated license plate lightning and license plate holder. Really discreet and effective. Measurement : 45mm diameter, 70mm depth. This taillight is EU approved.

Bates taillight

Bates taillight 2

Universal

Bates taillight

Bates type universal LED taillight for motorcycle. This universal black light can be assembled on your rear mudguard. The fixation enable you to adjust the angle of the taillight. Available with a black housing and your choice for the trim ring: satin black, brushed or chromed.ø50mm diameter. This taillight is EU approved.

View

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Leather Conditioner

Leather Conditioner 2

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Universal 3 buttons control

Universal 3 buttons control 2

Parts

Left 3-buttons universal switch

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

Universal 1 button control

Universal 1 button control 2

Parts

Universal 1 button control

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

View

Stainless steel collars for exhaust wrap

Stainless steel collars for exhaust wrap 2

Parts

Stainless steel collars for exhaust wrap

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Thermal wrap

Thermal wrap 2

Parts

Exhaust wrap

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

21W turn indicators bulbs

Parts

21W turn indicators bulbs

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 Yellow bulb

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Mirror adapter for ø22mm handlebar.

Mirror adapter for ø22mm handlebar. 2

Parts

Mirror adapter

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

1
2
3