Parts

Cable speedometer for Triumph

Mini round speedometer for Triumph Bonneville / Scrambler / Thruxton carburators with cable speedometers and Triumph EFI up to 2011.

With neutral indicator, wiring harness, oil pressure and turn signals.

This speedometer comes with its plug & play wiring harness. Available in black only.

219 €

Mini speedometer for Moto Guzzi V7

Small digital speedometer for Moto Guzzi V7 I and V7 II. Perfect to visually lighten the front of your bike while keeping the features of your original speedometer.

This part comes with its electronic box, plug & play wiring harness, functionning button and black aluminium fixation bracket (to be placed on the upper triple trees). 

995 €

Leather saddlebag for Triumph

Side leather saddlebag for Triumph Bonneville, Scrambler, Thruxton (before 2016). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a black satin painted aluminium plate that comes in place of your original side cover. 

275 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 4, 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

199 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

34 €

Classic round mirror

Classic round motorcycle mirror. This Ø100mm mirror offers a perfect finish while remaining discreet. It gives a great rear visibility and can be fitted on any motorcycle. Available in black only.

It can be adjusted thanks to its articulated 135m long shaft and to the kneecap of the mirror. 

It's sold per unit, and comes with two adapters (left thread and right thread).

45 €

Leather gas tank strap for V7

This leather gas tank strap / belt fits Moto Guzzi V7 I and V7 II. It enables to coat your gas tank and to give it a distinguished look. 

The straps get easily assembled on the gas tank cap thanks to two aluminium plates. An adjustable nylon belt enables you to wrap your tank with the strap and attach it.

115 €

Black leather gas tank strap

Universal leather gas tank strap / belt, fits with any gas tank with cap on the side. It gives a distinguished look to your motorcycle tank. 

It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. It particularly fits for Triumph Bonneville, Scrambler, Thruxton, Street Twin and T120. Maximum lenght 190cm, minimum 107cm.

125 €

Engine protection // sump guard for Triumph

Aluminium engine protection / sump guard for Triumph, gives an aesthetic style to your motorcycle and a better protection to your engine. Available for Triumph Bonneville / Scrambler / Thruxton before 2016.

Easy to assemble, comes with stainless steel screws and installation instructions.

115 €

Engine protection for Triumph - Satin black

This sump guard / engine protection is made in aluminium. It gives a stronger look to your Triumph Street Twin, Street Scrambler, Bonneville T120 and T100 (from 2016) or Thruxton 1200. It's 3mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. 

Available in satin black or brushed finish. It comes with all the necessary screwing.

115 €

Flat track handlebars

Flat Track handlebar manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. 

Available in Ø22mm diameter, and in Chromed or Brushed finish. 

69 €

BAAK N°1 handlebars - Satin black

Wide stailness steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguised look to your motorcycle, and improve its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a good quality part.

115 €

BAAK N°1 handlebars - Ø22mm

Wide stainless steel BAAK N°1 handlebars in Ø22mm diameter. It's flatter, wider and has more pullback / sweep to the driver than most of the other handlebars. It will offer a very distinguised look to your motorcycle, improves its handling qualities and your riding position. 

The stainless steel tubes we selected, very thin and resistant, makes it a great quality part.

95 €

BAAK N°1 Handlebar crossbar

Wide stainless steel handlebar with crossbar. It offers a very comfortable driving position and great handling. It's flatter, wider and has more pullback to the driver than other handlebars. Its central crossbar offers a nice scrambler look.  

The stainless steel tubes we selected, very thin and resistant, make it a good quality handlebar.

145 €

Street Bar handlebar with leather protection

Street Bar handlebar with crossbar and leather / foam protection. This handlebar has a 22mm diameter for the grips and 28,6mm diameter for the clamps. Its design offers a confortable riding position. It's only available in satin black powder coat painting. 

Can be provided with optional BAAK aluminium handlebar clamps.

160 €

Street Bar handlebars with optional handlebar clamps

Street Bar handlebar and risers / clamps in aluminium. This bar is perfect to give a more agressive look to your motorcycle and a more sporty riding position.  

The centric part / clamping area is 28,6mm diameter, the ends are 22mm diameter, which can require to adapt compatible handlebar clamps in Fat-bar handlebar as the ones we offer in option with this part.

115 €

Handlebar

Tracker Bar, made out of steel. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a combortable riding position. 

It's available in satin black finish only.

115 €

Scrambler chromed handlebars

Scrambler chromed handlebars, 22mm diameter. Made out of steel, it offers a better finish level than most of the original handlebars. It's high and has a good pullback / swipe to the rider, which gives a better driving position and comfort. 

With its central bar, it will offer a real scrambler look to your motorcycle.

65 €

Aluminium handlebar clamps

Machined aluminium handlebar clamps for motorcycle. These risers are available in 22mm diameter, 28,6mm diameter or 1 inch diameter (25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing.

Designed and manufactured at BAAK's workshop.

135 €

Leather cell phone mount - Aged brown

Universal cell phone mount made out of leather. This tiny bag is design to be assembled on your motorcycle handlebar. It enables you watch and use your smartphone while riding has its front transparent surface is touch sensitive. It gets closed thanks to a velcro that makes it easy to connect the phone cable while riding.

Available in Aged brown, Black, Ruby or Gold genuine leather.

145 €

"Avant" pack for Triumph Street Twin

Full kit to visually lighten the front of your Triumph and give it a more aggressive look. 

This pack includes : 

  • Metal flat headlight
  • 60mm headlight brackets
  • Side speedometer support
  • Under the steering column turn signals support + long wiring harness + pair of front turn signals
  • Regulator support 

Suit the Triumph Street Twin, Street Cup and Street Scrambler.

379 €

"Tracker" pack for Triumph Thruxton 1200

"Tracker" parts kit for Triumph Thruxton 1200. This pack enables you to transform your Thruxton into an elegant classic machine with a comfortable riding position. The kit is composed of parts designed and manufactured at our workshop so it can be easily fitted on your Triumph.

2 790 €

Moto guzzi V9 Pack - Aged brown leather - Turn signals support on the license plate

Parts kit for Moto Guzzi V9 Bobber / Roamer, which enables you radically transform your V9 into a classic machine with improved riding feelings and finish level. The bolt-on parts are easy to assemble, it's designed and manufactured by our team in France to give authenticity back to this motorcycle.

No additional part are required forthe assembly of the parts on your Moto Guzzi.

2 500 €

Regulator bracket for Street Twin / T120

Rectifier support for Triumph Street Twin, T100 and Bonneville T120. This bracket enables you to relocate your regulator behind your engine oil cooler instead of the lower fork té to lighten the front of your bike.

Manufactured in aluminium laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing and without regulator.

45 €

Handlebar controls for Triumph (since 2016)

Handlebar controls for Triumph Bonneville T100 / T120 (since 2016) with 1 inch (25,4mm) diameter handlebar. The push buttons can be linked to any functions : 

  • Throttle housing wich enables keep the ride-by-wire system + 2 buttons
  • 3 buttons switch with a turn switch + 2 buttons

Manufactured out of machined aluminium, satin black powder coat painted.

300 €

Mini front fender for Triumph

Mini stainless steel front mudguard for Triumph, perfect to modify the look of your motorcycle while keeping a good protection.

It's pre-drilled for the bike of your choice : Triumph Bonneville, Scrambler, Thruxton, and the new Street Twin, Street Scrambler, T100 and T120 from 2016. 

125 €

Scroll To Top