V7 850

Showing 1-12 of 12 item(s)

Thermal wrap

Thermal wrap 2

Parts

Exhaust wrap

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Stainless steel collars for exhaust wrap

Stainless steel collars for exhaust wrap 2

Parts

Stainless steel collars for exhaust wrap

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Classic rear mudguard for Moto Guzzi V7 / V7 850

Classic rear mudguard for Moto Guzzi V7 / V7 850 2

-10%

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

$305 $339

Time left

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Mini front mudguard for Moto Guzzi

$149 $187

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Handlebar controls kit by BAAK

Handlebar controls kit by BAAK 2

-15%

Universal

Universal handlebars controls kit

$190 $224

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

$22 $34

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

-35%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

$22 $34

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Leather fork gaiters

Leather fork gaiters 2

Parts

Leather fork gaiters

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

$33 $51

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

$33 $51

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

-15%

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

$785 $923

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-35%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

$95 $146

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...