V7 850

v7 850

Showing 1-19 of 19 item(s)

Rear Classic fender for Moto Guzzi V7 850 (2025-...)

Rear Classic fender for Moto Guzzi V7 850 (2025-...) 2

-20%

Moto Guzzi

Rear Classic fender for Moto Guzzi V7 850 (2025-...)

€240.00 €300.00

Time left

Rear Classic fender for Moto Guzzi V7 850 Euro 5+ (2025-...) Made from stainless steel, its molded end gives it a raw and elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), optional rear turn signal...

View

Rear fender Classic for Moto Guzzi V7 850 (2021-2024)

Rear fender Classic for Moto Guzzi V7 850 (2021-2024) 2

-20%

Moto Guzzi

Rear fender Classic for Moto Guzzi V7 850 (2021-2024)

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 850 Euro 5 (2021-2024). Made from stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Supplied with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), a choice of rear turn signal...

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Classic ø10 round motorcycle mirror in aluminum, long stem 2

Parts

Classic round motorcycle mirror ø10 long stem

The HIGHSIDER Pro MONTANA XL round motorcycle mirror combines elegance and practicality with a timeless design. Its black anodized finish, paired with a 175 mm articulated stem, provides improved rear visibility. Designed to enhance ergonomics and ensure a minimalist look, it fits vintage and custom motorcycles perfectly. Certified to European CE (E9)...

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Bar-end mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

The elegance of discretion. Designed for lovers of pure lines, this mirror in aluminum stands out for its profile of absolute thinness (only 5 mm thick). Its short stem and satin black finish allow it to blend with total sobriety on the handlebars of a Café Racer, a Scrambler or a characterful classic. A distinguished accessory that knows how to...

Removable windscreen for Moto Guzzi V7 III / V7 850

Removable windscreen for Moto Guzzi V7 III / V7 850 2

Parts

Removable windscreen for Moto Guzzi V7 III / V7 850 / V9

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windshield. 2 seconds to remove it without tools. Supplied with its fixings and headlight brackets, it is available in gloss black or leather (black or brown). Note, the stock headlight is not compatible; you will need a classic headlight ø180mm and a front turn signal...

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

Leather handlebar grip pad (black, brown, gold, red) for motorcycle

Leather handlebar grip pad (black, brown, gold, red) for motorcycle 2

Parts

Leather handlebar pad

Leather-covered handlebar pad. Beyond the protection it provides in case of impact with your handlebar, this pad and its leather cover will give a more refined look to the front of your machine. Our craftsmen reinterpret the codes of off-road handlebar pads here to give them an aesthetic use. The inner diameter that contacts the crossbar is ø12mm, the...

View

Extension for Classic round motorcycle mirror ø10

Extension for Classic round motorcycle mirror ø10 2

Parts

Extension for Classic round motorcycle mirror ø10

Aluminum extension for Classic round Mirror. This extension, compatible only with our Classic round Mirror, allows you to lengthen the mirror stem for improved rear visibility and offers greater adjustment options. It has the same finish as the mirror stem. This extension measures 55mm in length (center-to-center = 35mm). Sold individually.

Mini under-handlebar round motorcycle mirror ø8 in steel

Mini under-handlebar round motorcycle mirror ø8 in steel 2

Parts

Round under-bar motorcycle mirror ø8

Mini motorcycle mirror black steel Ø80mm specially designed to be mounted in the lower position, under your handlebar. It offers a discreet look and reliable visibility thanks to its wide-angle glass. Available Without adapter (for 8mm through-rod mounting) or with Adapter for 22mm handlebars. Sold individually.

View

Classic round motorcycle mirror ø10

Classic round motorcycle mirror ø10 2

Parts

Classic round motorcycle mirror ø10

Round motorcycle mirror Classic in aluminum. This black mirror with a Ø10cm glass offers an impeccable finish while remaining discreet. It provides perfect rear visibility and fits any motorcycle. Adjustable in height thanks to its 150mm articulated stem. Supplied with two adapters (left-hand and right-hand thread M10x1.25 mm). Additional adapters...

View

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum

Classic vintage motorcycle handlebar clamps for cafe racer in aluminum 2

Parts

Handlebar risers motorcycle - universal

Machined aluminum handlebar clamps for motorcycles. Available in diameters ø22mm, ø28.6mm or 1 inch (ø25.4mm), these machined aluminum clamps are lightweight and elegant. They are finished in high-quality satin black epoxy, machined from solid and delivered with stainless steel fasteners (size options available) Designed and manufactured by the BAAK...

View

Leather handlebar grips

Leather handlebar grips 2

Parts

Leather handlebar grips

Leather handlebar grips. Wrapped in high-quality leather, they add a touch of elegance to your machine while maintaining a secure grip. Available in black leather, aged brown, gold. Four thread colors available to perfectly match your bike. For 1" (ø25.4mm) or ø22mm diameter handlebars. Supplied in pairs

View

Biltwell Thruster handlebar grips

Biltwell Thruster handlebar grips 2

Parts

Biltwell Thruster handlebar grips

Handlebar grips Biltwell Thruster right and left, for characterful motorcycles. Provide a secure grip on the bars, perfect comfort and a look unmatched from stock. For 1" (25.4mm) or ø22mm diameter handlebars. Supplied in pairs.

View

Biltwell Renegade handlebar grips

Biltwell Renegade handlebar grips 2

Parts

Biltwell Renegade handlebar grips

Handlebar grips Biltwell Renegade right and left, for characterful motorcycles. Provide a secure hold on the bars, perfect comfort and a look unmatched by the original. For 1" (ø25.4mm) or ø22mm handlebars. Supplied in pairs. Available in black only.

View

Round motorcycle mirror ø8

Round motorcycle mirror ø8 2

Parts

Round motorcycle mirror ø8

Mini mirror in steel with a Ø8cm diameter and M8 thread, ideal for a high position. The mirror stem measures 13cm long; its bend is specifically designed to ensure good rear visibility while remaining discreet. Sold individually, available in satin black only. Suitable for mounting on the right or left side.

View

Leather cable-guide strap

Leather cable-guide strap 2

Parts

Leather cable-guide strap

Leather cable strap. This leather strap lets you secure your cables together or attach them to your handlebar. If, like us, the finish of your machine is one of your obsessions, this strap is ideal for your project. Available in Aged Brown leather, Black and Gold. Available in lengths 80mm, 90mm, 115mm, 130mm. Width 20mm. Sold individually, not in pairs.

View

Tracker bar handlebars

Tracker bar handlebars 2

-15%

Parts

Tracker bar handlebars

€135.15 €159.00

Time left

Tracker bar handlebar, made from aluminium. This handlebar has a diameter of ø28.6mm at the clamp area and ø22mm at the grips. It offers a pleasing sweep back towards the rider, ensuring a comfortable riding position. Available only in a high‑quality satin black epoxy paint finish. Satin black epoxy on this type of part is far more elegant and refined...

View

Flat Track handlebars Ø22mm

Flat Track handlebars Ø22mm 2

Parts

Flat Track Handlebar Ø22mm

Flat Track Handlebar with ø22mm diameter. Made of steel, it offers a cooler riding position and an enhanced look. The strong sweep of this handlebar back toward the rider and its pure Flat Track styling will ensure better handling of your machine and great comfort. Available in Ø22mm diameter with Chrome or Brushed finish.

View

Ø22mm handlebar rear view mirror

Ø22mm handlebar rear view mirror 2

Parts

Mirror adapter

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View