Bonneville T100 (2016 -...)

Showing 1-36 of 76 item(s)

Parts

Round 21W turn indicators

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Parts

Mini LED turn signal mo.blaze Pin

€54.00

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

View

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Removable windshield for Triumph Bonneville T100 / T120

Removable windshield for Triumph Bonneville T100 / T120 2

-15%

Parts

Removable windshield for Triumph Bonneville T100 / T120

€693.60 €816.00

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

View

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

-35%

Parts

Flat triple trees Triumph T100/T120

€390.00 €600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

View

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedometer for Triumph (2016–...)

€966.00

Mini Daytona speedometer for Triumph (2016–... / Liquid-cooled) The 60mm Daytona mini speedometer mounts on the original handlebar clamps of modern Triumphs (2016–...): T120, T100, Speed Twin 900, Scrambler 900 This is a 100% plug & play accessory. It includes a bracket, necessary screws, and a multiplexing unit. Pre-wired in our workshop, it installs...

View

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

-30%

Parts

Trail engine protection for Triumph T100/T120

€101.50 €145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

View

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

View

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

View

Mini speedometer Triumph Street Twin / Scrambler / Bonneville T120 / T100

-15%

Triumph

Motogadget Tiny Speedometer for Triumph (2016–...)

€1,045.50 €1,230.00

Mini Speedometer for Triumph (2016–... / Liquid-cooled) This Plug & Play mini speedometer is THE solution to clean up your Triumph cockpit while retaining all original speedometer information.It comes with mounting plates for installation on one of the fork tubes or under the top triple clamp (if you have a BAAK triple clamp). The dial is available in...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

-30%

Triumph

Bates headlight plate for Triumph (2016)

€118.30 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

High Scrambler front mudguard for Triumph (2016-...) by BAAK

-20%

Triumph

Scrambler front mudguard for Triumph (2016)

€228.00 €285.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle....

View

Aluminium intake cover for Triumph 900 (2016-...)

-30%

Triumph

Intake covers for Triumph 900 (2016)

€45.50 €65.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

-35%

Triumph

Rectifier bracket for Triumph (2016)

€29.25 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

-30%

Triumph

Side license plate holder for Triumph

€66.50 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Relocated ignition switch control bracket for Triumph (2016)

-35%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€19.50 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Rear turn indicators brackets for Triumph

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Engine protection for Triumph (2016-…) Protect Your Bike in Style!

-35%

Triumph

Engine protection for Triumph (2016-...)

€74.75 €115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View