Front end & chassis

Body & Suspension

Showing 1-10 of 10 item(s)

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

Regulator bracket for Triumph (pre-2016)

Regulator bracket for Triumph (pre-2016) 2

-20%

Triumph

Regulator bracket for Triumph (pre-2016)

€24.00 €30.00

Time left

Regulator mounting plate for Triumph (pre-2016 - air-cooled). This bracket allows the voltage regulator to be relocated to the horn position. The horn can then be mounted below, on the same plate. Compatible with our Front turn signal bracket for Triumph. Laser-cut aluminium. Installation requires relocating your wiring harness under the tank. All...

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

Bracket for regulator / turn signals / horn for Triumph (pre-2016) 2

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Support for Motogadget Tiny speedometer for Triumph (before 2016)

Support for Motogadget Tiny speedometer for Triumph (before 2016) 2

-20%

Triumph

Support for Motogadget Tiny speedometer for Triumph (before 2016)

€39.20 €49.00

Time left

Tiny Motogadget speedo mounting plate for Triumph (pre-2016). This is a machined aluminium plate, satin black epoxy painted. Available in Above the steering stem position, or in the classic position in front of the handlebars. This accessory is supplied with the fasteners required for installation.

View

Headlight plate for Bates Triumph (before 2016)

Headlight plate for Bates Triumph (before 2016) 2

-20%

Triumph

Headlight plate for Bates Triumph (before 2016)

€135.20 €169.00

Time left

Aluminium Bates-style headlight plate for Triumph (pre-2016 - air-cooled). Essential for a harmonious aesthetic behind a Bates headlight, it hides the steering column as well as all the cables. Supplied with 4 leather mounting straps in black / brown / gold or chocolate. Available in satin black and brushed aluminium finishes. Dimensions 220 x 190mm

View

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.