Front end & chassis

Body & Suspension

Showing 1-58 of 58 item(s)

Outlet

OUTLET - Front mini fender for Moto Guzzi V7 and V9

OUTLET available in Gloss Black and Satin Black only. Mini Front Fender for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made from stainless steel. This very short front fender gives the front end of your motorcycle a lighter, more minimalist look. It comes pre-drilled to fit the original front fender mounting points. Designed and handcrafted by our...

View

Outlet

OUTLET - Front fender Classic Medium for Moto Guzzi V7

€84.00

OUTLET, available in gloss black only. Classic Medium Front Fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. The rolled edges at both ends give it a refined, classic look. It comes pre-drilled to fit the original front fender mounting system. Designed and handcrafted by our artisans in our workshop in France. Dimensions:...

View

OUTLET - Classic Mini front fender for Moto Guzzi V7

-20%
New

Outlet

OUTLET - Classic Mini front fender for Moto Guzzi V7

€62.40 €78.00

OUTLET, available in gloss black only.Classic Mini Front Fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. The rolled edges at both ends give it a refined, classic look. It comes pre-drilled to fit the original front fender mounting system. Designed and handcrafted by our artisans in our workshop in France. Dimensions: 325...

View

Universal Round LED Turn Signals in Aluminum - BAAK

Universal Round LED Turn Signals in Aluminum - BAAK 2

Parts

Turn signals Round - LED 5W version

€89.00

Discover our Round turn signals in LED version. Made from aluminum with a 40mm diameter, 5W LED bulbs and an M10 mounting stem. These universal turn signals feature a very fine finish, they are small enough to be discreet and elegant, yet large enough to deliver a vintage look perfectly neo-retro. This LED version provides compatibility with the...

PRE-ORDER - Baak Heritage windscreen for Triumph

On sale!

Triumph

PRE-ORDER - Baak Heritage windscreen for Triumph

€129.00

🔥 Pre-order your BAAK Heritage flyscreen for Triumph post-2016 and benefit from a special 20% pre-order discount off the retail price. ⏳ Limited to 10 pre-orders! 📦 Delivery scheduled for October 2026. Be among the first to fit this Heritage flyscreen to your motorcycle! Its clean, elegant design adds a subtly vintage touch without overdoing it. It...

View

Classic front headlight ø180mm - Moto Guzzi V7

Parts

Classic front headlight ø180mm - Moto Guzzi V7

€110.00

Classic round front headlight for motorcycle Moto Guzzi V7 I, II, III, V7 850 and V9 with M8 side mounting and a diameter of ø180mm. It features a metal bowl and bezel, with a plastic lens, offering an exceptional level of finish. Its profiled bowl gives it a distinctly classic look. To choose the plug&play wiring harness, simply indicate whether...

View

Handlebar controls

Baak push button - Universal

€19.20

This push button is designed to fit seamlessly with the style of your vintage / neo-retro motorcycle. It can be mounted on the handlebar, for example on your mirror clamps, or anywhere on the bike thanks to its M6 fixing and very compact design. It lets you control accessories (auxiliary lights, horn, headlight flash ...) The button is water-resistant;...

Front and rear fender kit for Triumph Bonneville (2016-...)

-20%
Pack

Triumph

Front and rear Classic fender kit for Triumph (post-2016)

€336.00 €420.00

Time left

Designed to give your Triumph a retro and premium look while improving usability, this Classique fender pack brings a more balanced silhouette, timeless style and meticulous finishing details.Made from stainless steel, the front and rear fenders combine strength, durability and elegance, while effectively protecting against road spray. This complete pack...

View

Triumph

Triangle side covers for Triumph (after 2016)

€75.00

Give your Triumph a stronger character with these aluminum side covers. They replace the original plastic covers and neatly conceal the airbox, while reinforcing your bike’s classic styling. These covers are sold individually (right or left side) and come with all necessary mounting hardware.Compatible with Triumph T100 / T120 Bonneville models...

View

R 12 nine t

Headlight protection grille for BMW R12

€98.00

Protect the headlight of your BMW R12 with style thanks to this Classic headlight grille, crafted in stainless steel for optimal durability. Its satin black epoxy coating gives it a sober and elegant look, perfectly in keeping with the R12’s retro aesthetic. Made in France, manufactured in our workshop.

Parts

Mini turn signal LED mo.blaze Pin

€54.00

Mini motogadget LED turn signal 3W minimalist aluminium turn signal with an Ø8mm mounting stem. When off, these turn signals are almost invisible, while providing ideal brightness in operation. We use them on the majority of our custom projects. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your...

View

Universal

Micro turn signal LED mo.blaze Tens1

€49.42

Micro motogadget LED turn signal minimalist aluminum unit with Ø8mm mounting stem. The motogadget mo.blaze tens is one of the smallest certified turn signals in the world. Each turn signal is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Finish choice in Black or polished Aluminum finish. Turn signal...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original Moto Guzzi V7 III / V7 850 / V9 headlight

€103.20 €129.00

Time left

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight brackets, compatible with original LED and bulb headlights.60 mm long with 39–40 mm mounting clamps, they also allow installation of aftermarket turn signals. Satin black epoxy finish, delivered in pairs with stainless steel fasteners for a simple and robust...

View

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

LED motorcycle turn signals type Bullet black/brushed bezel

€78.00

Round LED 10W motorcycle turn signals, Bullet-style in black aluminum with brushed trim, simply beautiful. With a clear lens, they measure 20 mm in diameter and 36.5 mm in length. They install easily using a screw mounting (M8mm) and are compatible with a 12 V system. Delivered sleeved and with crimped Japanese round terminals ø3.2mm Approved to CE...

View

Removable windscreen for Moto Guzzi V7 III / V7 850

Removable windscreen for Moto Guzzi V7 III / V7 850 2

Parts

Removable windscreen for Moto Guzzi V7 III / V7 850 / V9

€816.00

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windshield. 2 seconds to remove it without tools. Supplied with its fixings and headlight brackets, it is available in gloss black or leather (black or brown). Note, the stock headlight is not compatible; you will need a classic headlight ø180mm and a front turn signal...

View

Triumph

Removable windscreen for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this removable retro-touring windscreen kit. It takes 2 seconds to remove without tools.It includes a removable windscreen and its fittings, as well as headlight brackets matched to the original model. This windscreen is compatible with the original headlight or any other ø180mm headlight, notably our phare...

View

Wiring harness for adaptable turn signal MOTO GUZZI V7 850

Wiring harness for adaptable turn signal MOTO GUZZI V7 850 2

Parts

Wiring harness for adaptable Moto Guzzi V7 850 turn signal

€33.00

Need to fit aftermarket turn signals to your Moto Guzzi? This plug & play wiring harness is made for you! Compatible with your motorcycle's original connectors, it easily adapts to turn signals with Japanese terminals from ø3.2 mm to 3.7 mm. It is the practical solution to customize your machine. Sold in pairsMade in France

With bracket for relocated switch only 2

Parts

Flat triple clamp for Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat machined-aluminium triple clamp. Satin black finish thanks to a high-quality epoxy paint, and supplied with a pair of risers of your choice. This triple clamp lowers your motorcycle by 25mm at the front, so it is recommended to adjust your shocks or choose our lowering kit. It is also compatible with the...

View

Plug and play headlight for Triumph (2016...)

Plug and play headlight for Triumph (2016...) 2

Parts

Front headlight parking/position light plug-and-play for Triumph (after 2016)

€27.00

Want to customize your Triumph (2016 and up) without the hassle? The plug-and-play front headlight pilot light is here for that. With its connector perfectly compatible with the original wiring harness, you can install an aftermarket front headlight in no time. Whether for a café racer, scrambler or bobber project, this pilot light gives you a simple,...

Mini speedometer Daytona for Triumph (2016-...)

Mini speedometer Daytona for Triumph (2016-...) 2

Parts

Mini speedometer Daytona for Triumph (after 2016)

€966.00

Daytona mini speedometer for Triumph The 60mm Daytona mini speedometer mounts on the original clamps of modern Triumphs (2016-...): T120, T100, Speed Twin 900, Scrambler 900 It is a 100% plug & play accessory, it includes a bracket, the necessary fasteners as well as a multiplexing module. Pre-wired in our workshop, it installs easily without...

View

Fork spring shims +15mm Moto Guzzi V7 850

Fork spring shims +15mm Moto Guzzi V7 850 2

-15%

Parts

Fork spring shims +15mm Moto Guzzi V7 850

€26.35 €31.00

Time left

This pair of stainless fork spring shims raises the front of your V7 850 by 15mm, notably so your motorcycle retains a similar stance if you fit our Big Body 390mm shocks. These shims are fitted simply in addition to the original fork spring shims. sold in pairsMade in France

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi

Turn signals Brake lights BAAK Triumph Royal Enfield Moto Guzzi 2

Parts

Turn Signals + Brake Light 3-in-1 - Full Black

€156.00

These elegant aluminium turn signals streamline your motorcycle. The rear turn signals integrate brake lights and position lights. The front turn signals are classic and only provide the turn signal function. Powerful lighting. Stem M8 ø, 38mm long, 22mm ø lens.

View

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK

Trail headlight plate for dual optics motorcycle in fiberglass - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal dual-headlight headlight fairing draws its inspiration from 1980s trail bikes. Ideal for a Scrambler project, this fairing is designed by us and made from fiberglass. It includes an extension of the wiring harness and aluminum mounting brackets that attach to the fork tubes (ø39 - ø40mm / ø41 - ø42mm / ø43mm optional).We offer it in a raw...

View

Triumph

Brembo brake pads for Triumph

€51.80

Front brake pads Brembo for Triumph. Softer than the original, these front brake pads made from quality materials will ensure consistently reliable braking, both cold and at high temperatures. The friction coefficient is higher than your original pads, which provides excellent braking performance and increased safety on the road. The kit includes 2 pads...

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

Black aluminum headlight stays for motorcycle - BAAK

Black aluminum headlight stays for motorcycle - BAAK 2

Universal

Short universal headlight brackets for classic motorcycles

€129.00

Motorcycle headlight brackets, for M8 side-mounted headlight attachment, with optional turn signal mounts. Designed and manufactured in our BAAK workshop in France. Ideal for fitting a BAAK headlight and slimming the profile of your machine. Ø39 to 40mm and length 60mm for Moto Guzzi V7 I and II Ø41 to 42mm and length 50mm for Triumph Bonneville T100,...

View

Triumph

Classic headlight with integrated gauge for Triumph (after 2016)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph Integrated into the nacelle of a Classic ø180mm headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to tidy the cockpit of your Triumph while retaining the information from your original instrument and ensuring optimal readability. The speedometer dial is available...

View

Triumph

Bates headlight with integrated speedo for Triumph (after 2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph Integrated into a Bates housing ø150mm, this motogadget Tiny Plug & Play speedometer is a simple solution to clean up the cockpit of your Triumph while keeping the information from your original instrument. The assembly is delivered pre-wired, with its multiplexing box, its wiring harness, and its...

View

Triumph

Motogadget Tiny speedometer for Triumph (after 2016)

€1,230.00

Mini speedometer for Triumph This Mini speedometer Plug & Play is THE solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer.This speedometer is supplied with mounting plates for installation on one of the fork tubes, or under the upper triple clamp (if you have a BAAK triple clamp). Gauge...

View

Headlight plate for Bates headlight Triumph (2016-...)

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Triumph

Regulator bracket for Triumph (after 2016)

€45.00

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Triumph

Front turn signal bracket for Triumph

€30.00

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

Parts

Heritage headlight

€99.00

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Parts

Classic Front Headlight ø180mm - Universal

€90.00

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Parts

Bates front headlight

€75.00

Bates-style headlight for motorcycle. This lower-mounted headlight measures ø15cm in diameter. Bowl and rim in metal. Discreet, it enhances the machine's look. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome rim. It is supplied with the mounting plate adapted to the chosen motorcycle model. EU approved.

View

Classic Headlight with Integrated Speedometer Universal

Parts

Classic Headlight with Integrated Speedometer Universal

€678.00

Classic headlight with integrated speedometer universal. The headlight with a satin black metal bowl of Ø180mm features M8 side mounts. Available with a headlight trim in Black, Brushed or Chrome. The speedometer is manufactured by Acewell. It is easily programmed according to your wheel diameter. Installing the speedometer requires motorcycle electrical...

View

Triumph

Front fender mounting brackets for Triumph (after 2016)

€45.00

Front fender mounting brackets for Triumph (2016-... - liquid-cooled) in stainless steel. These mounting brackets allow you to adjust the height of your fender and guide cables along the fork. Particularly useful if you change the diameter of your front wheel. Supplied in pairs, fender not included. Made in France

View

Parts

Oval 3W Universal LED Turn Signals

€19.80

Universal oval LED turn signals in plastic with a total length of 60mm and M10 mounting stem. These turn signals feature a very nice finish, for a more discreet look than most stock indicators. They offer unbeatable value without compromising the style of your motorcycle. Sold in pairs. EU approved.

Triumph

Wide triple clamp kit for Triumph T100-T120 (after 2016)

€1,200.00

Wide triple tree kit for Triumph T100 / T120 (2016-... - liquid cooled), allowing fitment of a wide front tyre (3.50). The kit includes upper and lower triple trees widened by 20mm, the lower bearing, disc spacers, clamps and axle. It allows a 25mm lowering of the front. This kit is notably used on our Triumph Bonneville T120 Bobber. We recommend...

View

Turn signal bracket kit for original front and rear for Triumph (after 2016)

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

€24.00 €30.00

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Front mini fender for Moto Guzzi V7 and V9

-20%

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

€132.00 €165.00

Time left

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

OUTLET - Front fender Medium for Moto Guzzi V7 and V9 2

-20%

Products

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

€85.20 €106.50

Time left

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made from stainless steel. It is short but long enough to protect you from front wheel spray. It is pre-drilled to fit the mounting system of your original fender Designed and handcrafted by our artisans at the workshop in France. Dimensions: 410x125mm.Made in France

View

Classic Mini front fender for Moto Guzzi V7

-20%

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7

€86.40 €108.00

Time left

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Front fender Classic Medium for Moto Guzzi V7

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

€25.00

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Bates headlight mount for Moto Guzzi V7 III and V7 850

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

€25.00

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Triumph

Rear fender wiring harness for Triumph

€19.00

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

€29.00

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Parts

Headlight spacers

€22.00

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Parts

H4 bulb (yellow)

€12.00

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

Triumph

2Win shock absorbers for Triumph (after 2016)

€517.20

2Win aluminium shocks for Triumph (liquid-cooled - from 2016). These 2Win shocks are adjustable in spring preload and hydraulics. Each click of the knob changes the compression and rebound hydraulic settings simultaneously, very easy to use. Aluminium shocks, sold in pairs. Available in 340mm and 350mm lengths.

View