Front end & chassis

Showing 49-60 of 60 item(s)

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Front fender Classic Medium for Moto Guzzi V7

Front fender Classic Medium for Moto Guzzi V7 2

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Front fender Classic Medium for BMW R NineT

€228.00 €285.00

Time left

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mount for Moto Guzzi V7 III and V7 850 2

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear fender wiring harness for Triumph

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for BMW NineT

Parts

Turn signal wiring harness for BMW R NineT

Turn signal wiring harness for BMW R NineT. These adapters allow you to connect any 10W universal turn signal to the original wiring harness of your BMW R NineT without cutting or soldering any wire. Supplied in pairs. Total length 360mm.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.

Motogadget M-Tri for Triumph (pre- 2016)

Motogadget M-Tri for Triumph (pre- 2016) 2

Triumph

M-tri Motogadget control unit for Triumph (before 2016)

M-TRI multiplexing unit manufactured by Motogadget for Triumph Bonneville, Scrambler, Thruxton EFI from 2011 to present (electronic speedometer). Essential to remove the original speedometer, because without it the motorcycle will not start. This unit restores all original functions and allows fitting any speedometer. It is the unit used in the...

View

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

2Win shock absorbers for Triumph (av. 2016)

2Win shock absorbers for Triumph (av. 2016) 2

Triumph

2Win shock absorbers for Triumph (before 2016)

2Win aluminum shocks for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic damping. Each click of the dial changes compression and rebound damping simultaneously. Very easy to use, even while riding. If you choose shock lengths shorter than stock, we recommend our Short fork spring shims to proportionally...

View

1
2
3