Front end & chassis

Showing 49-67 of 67 item(s)

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Front mini fender for Moto Guzzi V7 and V9

Front mini fender for Moto Guzzi V7 and V9 2

-20%

Moto Guzzi

Front mini fender for Moto Guzzi V7 and V9

€132.00 €165.00

Time left

Front fender Mini for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. This very short front fender will visually lighten the front of your machine. It is pre-drilled to fit your original fender's mounting system. This Medium front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

OUTLET - Front fender Medium for Moto Guzzi V7 and V9 2

-20%

Products

OUTLET - Front fender Medium for Moto Guzzi V7 and V9

€85.20 €106.50

Time left

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made from stainless steel. It is short but long enough to protect you from front wheel spray. It is pre-drilled to fit the mounting system of your original fender Designed and handcrafted by our artisans at the workshop in France. Dimensions: 410x125mm.Made in France

View

Classic Mini front fender for Moto Guzzi V7

Classic Mini front fender for Moto Guzzi V7 2

-20%

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7

€86.40 €108.00

Time left

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Front Mini Classic Fender for BMW NineT

€228.00 €285.00

Time left

Classic Mini front fender for BMW R 1200 NineT, made from stainless steel. The moulded ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate matched to the selected model and the necessary stainless fasteners. This Classic front fender is available in satin black, polished, glossy black, brushed and...

View

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Front fender Classic Medium for Moto Guzzi V7

Front fender Classic Medium for Moto Guzzi V7 2

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Front fender Classic Medium for BMW R NineT

€228.00 €285.00

Time left

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Bates headlight mount wide fork yokes Triumph (2016-...)

Bates headlight mount wide fork yokes Triumph (2016-...) 2

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mount for Moto Guzzi V7 III and V7 850 2

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear fender wiring harness for Triumph

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Turn indicators wiring harness for BMW NineT

Parts

Turn signal wiring harness for BMW R NineT

Turn signal wiring harness for BMW R NineT. These adapters allow you to connect any 10W universal turn signal to the original wiring harness of your BMW R NineT without cutting or soldering any wire. Supplied in pairs. Total length 360mm.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn signal bracket covers for BMW NineT

€24.00 €30.00

Time left

Front turn signal bracket covers for BMW NineT. These black bracket covers are particularly useful to refine the finish when you replace your original front turn signals. Designed in the workshop, manufactured in aluminium, they are painted in satin black epoxy paint. Supplied in pairs with the stainless steel fasteners required for fitting.

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

2Win shock absorbers for Triumph (2016-…)

2Win shock absorbers for Triumph (2016-…) 2

Triumph

2Win shock absorbers for Triumph (after 2016)

2Win aluminium shocks for Triumph (liquid-cooled - from 2016). These 2Win shocks are adjustable in spring preload and hydraulics. Each click of the knob changes the compression and rebound hydraulic settings simultaneously, very easy to use. Aluminium shocks, sold in pairs. Available in 340mm and 350mm lengths.

View

1
2
3