Front end & chassis

Showing 49-58 of 58 item(s)

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Front fender Classic Medium for Moto Guzzi V7

Front fender Classic Medium for Moto Guzzi V7 2

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Bates headlight mount wide fork yokes Triumph (2016-...)

Bates headlight mount wide fork yokes Triumph (2016-...) 2

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mount for Moto Guzzi V7 III and V7 850 2

V7 III (2017-2022)

Bates headlight mount for Moto Guzzi V7 III and V7 850

Bates headlight mounting bracket for Moto Guzzi V7 III and V7 850, essential to fit a lower-mount headlight (Bates type) on your machine. Made from 3mm thick aluminum, satin black epoxy paint. Available only in black finish.

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear fender wiring harness for Triumph

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Turn indicators wiring harness for Triumph (2016-...)

Turn indicators wiring harness for Triumph (2016-...) 2

Parts

Turn signal wiring harness for Triumph (after 2016)

This turn signal wiring harness is essential for fitting new turn signals to your Triumph (2016-... liquid-cooled). The harness is plug & play on your motorcycle’s original terminals. This 160mm harness is ideal for installing aftermarket turn signals. Supplied in pairs.

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

2Win shock absorbers for Triumph (2016-…)

2Win shock absorbers for Triumph (2016-…) 2

Triumph

2Win shock absorbers for Triumph (after 2016)

2Win aluminium shocks for Triumph (liquid-cooled - from 2016). These 2Win shocks are adjustable in spring preload and hydraulics. Each click of the knob changes the compression and rebound hydraulic settings simultaneously, very easy to use. Aluminium shocks, sold in pairs. Available in 340mm and 350mm lengths.

View

1
2
3