Front end & chassis

Showing 25-48 of 55 item(s)

Headlight plate for Bates headlight Triumph (2016-...)

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

High front fender Scrambler for Triumph (2016-...)

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

Lowering spacers for BMW R NineT speedometer

BMW

Lowering spacers for BMW R NineT speedometer

€22.00

Speedometer lowering spacers for BMW R NineT. This kit of 4 spacers allows you to lower your original speedometer by 10mm and gives the cockpit a visually cleaner appearance. Compatible with BMW R NineT Scrambler, Racer, Pure and Urban GS.

Triumph

Regulator bracket for Triumph (after 2016)

€45.00

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Triumph

Front turn signal bracket for Triumph

€30.00

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

-20%

BMW

Bates headlight plate for BMW R NineT

€135.20 €169.00

Time left

Bates headlight plate for BMW R NineT. This aluminium plate hides the steering column and cables after fitting a Bates headlight on your BMW R 1200 NineT. Made from aluminium, it is available in Satin Black or Brushed Aluminium finishes. Compatible with Bates headlight and original headlight. Leather mounting straps with metal buckle are available in 4...

View

Parts

Heritage headlight

€99.00

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Parts

Classic Front Headlight ø180mm - Universal

€90.00

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Parts

Bates front headlight

€75.00

Bates-style headlight for motorcycle. This lower-mounted headlight measures ø15cm in diameter. Bowl and rim in metal. Discreet, it enhances the machine's look. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome rim. It is supplied with the mounting plate adapted to the chosen motorcycle model. EU approved.

View

Classic Headlight with Integrated Speedometer Universal

Parts

Classic Headlight with Integrated Speedometer Universal

€678.00

Classic headlight with integrated speedometer universal. The headlight with a satin black metal bowl of Ø180mm features M8 side mounts. Available with a headlight trim in Black, Brushed or Chrome. The speedometer is manufactured by Acewell. It is easily programmed according to your wheel diameter. Installing the speedometer requires motorcycle electrical...

View

Triumph

Front fender mounting brackets for Triumph (after 2016)

€45.00

Front fender mounting brackets for Triumph (2016-... - liquid-cooled) in stainless steel. These mounting brackets allow you to adjust the height of your fender and guide cables along the fork. Particularly useful if you change the diameter of your front wheel. Supplied in pairs, fender not included. Made in France

View

Parts

Oval 3W Universal LED Turn Signals

€19.80

Universal oval LED turn signals in plastic with a total length of 60mm and M10 mounting stem. These turn signals feature a very nice finish, for a more discreet look than most stock indicators. They offer unbeatable value without compromising the style of your motorcycle. Sold in pairs. EU approved.

Triumph

Wide triple clamp kit for Triumph T100-T120 (after 2016)

€1,200.00

Wide triple tree kit for Triumph T100 / T120 (2016-... - liquid cooled), allowing fitment of a wide front tyre (3.50). The kit includes upper and lower triple trees widened by 20mm, the lower bearing, disc spacers, clamps and axle. It allows a 25mm lowering of the front. This kit is notably used on our Triumph Bonneville T120 Bobber. We recommend...

View

Turn signal bracket kit for original front and rear for Triumph (after 2016)

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

€24.00 €30.00

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Front Mini Classic Fender for BMW NineT

€228.00 €285.00

Time left

Classic Mini front fender for BMW R 1200 NineT, made from stainless steel. The moulded ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate matched to the selected model and the necessary stainless fasteners. This Classic front fender is available in satin black, polished, glossy black, brushed and...

View

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Front fender Classic Medium for BMW R NineT

€228.00 €285.00

Time left

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Triumph

Bates headlight mount wide fork yokes Triumph (after 2016)

€25.00

This Bates headlight mounting plate is intended for the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork yoke kit. Bolt hole centre distance: 113mm. Made from 4mm thick aluminium. Satin black epoxy paint.