Front end & chassis

Showing 109-120 of 170 item(s)

Front Fender Raiser Kit for Royal Enfield 650 Interceptor / Continental GT

Front Fender Raiser Kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front Fender Raiser Kit for Royal Enfield 650 Interceptor / Continental GT

Front fender lift kit for Royal Enfield 650 Interceptor / Continental GT. This kit of 4 screws and 4 aluminum spacers raises your front fender by 10mm if you plan to fit a taller-profile tire than the original tire on your Royal Enfield 650 Interceptor / Continental GT. Compatible with your original fender. These spacers are to be installed between your...

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

Time left

Classic Mini front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), made from stainless steel. Rolled edges at its ends give it a very elegant classic look. It is pre-drilled to fit your motorcycle. Available without or with a lift kit (+10mm) if you wish to fit a front tire with a taller profile than the original. This Classic front...

View

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Front Fender Classic Medium Royal Enfield 650 Interceptor / Continental GT

€96.00 €120.00

Time left

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit your Royal Enfield. Available without or with a +10mm lift kit if you want to mount a front tyre with a taller profile than the original. This Classic...

View

Bates headlight mount Royal Enfield 650 Interceptor / Continental GT

Bates headlight mount Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Bates headlight mount Royal Enfield 650 Interceptor / Continental GT

Bates headlight mounting bracket for Royal Enfield 650 Interceptor / Continental GT, essential for fitting a lower-mount (Bates-style) headlight on your motorcycle. Made from 3mm thick aluminium, satin black epoxy paint. Available only in black finish. Delivered with the necessary stainless steel fasteners.

High front fender Scrambler for Moto Guzzi V7I and V7II

High front fender Scrambler for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Front fender Scrambler for Moto Guzzi V7I / V7II

€228.00 €285.00

Time left

High front fender Scrambler for Moto Guzzi V7I and V7II. Handcrafted in stainless steel, this high front fender mounts to your V7’s original lower triple clamp using the supplied satin black mounting plate. It provides solid protection and a bold off-road look for your machine. Available in Satin Black, Gloss Black, Brushed, Polished. Dimensions:...

View

Regulator bracket for Triumph (pre-2016)

Regulator bracket for Triumph (pre-2016) 2

-20%

Triumph

Regulator bracket for Triumph (pre-2016)

€24.00 €30.00

Time left

Regulator mounting plate for Triumph (pre-2016 - air-cooled). This bracket allows the voltage regulator to be relocated to the horn position. The horn can then be mounted below, on the same plate. Compatible with our Front turn signal bracket for Triumph. Laser-cut aluminium. Installation requires relocating your wiring harness under the tank. All...

Regulator bracket for Triumph (after 2016)

Regulator bracket for Triumph (after 2016) 2

Triumph

Regulator bracket for Triumph (after 2016)

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

Bracket for regulator / turn signals / horn for Triumph (pre-2016) 2

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Bates headlight bracket

Bates headlight bracket 2

Parts

Bates headlight bracket

Bates headlight mounting bracket, essential for fitting a lower-mounted front headlight. Made from 4mm thick aluminium. Supplied with stainless steel fasteners. Ø6mm mounting hole centers from 68mm to 95mm Bates headlight mounting Ø10mm

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Ignition switch relocator for Triumph (after 2016)

Ignition switch relocator for Triumph (after 2016) 2

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Side speedometer holder for Triumph Street Twin / Street Scrambler

Side speedometer holder for Triumph Street Twin / Street Scrambler 2

-20%

Parts

Offset speedometer bracket for Triumph Street Twin / Street Scrambler

€71.20 €89.00

Time left

Offset speedometer bracket for Triumph Street Twin / Speed Twin 900 / Street Scrambler. This accessory allows you to offset your speedometer to the right or left of the ignition switch to visually clear the front of your machine.Less prominent at the front, your original speedometer becomes more discreet, a simple solution to give your Street Twin an...

1
…
9
10
11
…
15