Parts » Moto Guzzi » v7 Iii

Shims short fork spring

Short fork spring blocks. To adapt our shorter shocks, and proportionally belittle the front of your Triumph Bonneville / Scrambler / Thruxton or Moto Guzzi V7 I and II sice 2013, you will need these fork springs blocks.

It comes simply replacing the original ones. It comes with installation instructions.

19 €

Moto Guzzi V7 III Bates headlight bracket

Bates headlight fixation bracket for Moto Guzzi V7 III, required to mount a lower fixation headlight on your motorcycle.

Made in aluminium, 3mm thick, black powder coat painting. Available in black finish only. Comes with all the necessary stainless steel screwing.

25 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility with its wide angle glass.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually. Fit both left and right sides, available in satin black only. 

34 €

Mini round mirror

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

29 €

Classic round mirror

Classic round motorcycle mirror. This Ø100mm mirror offers a perfect finish while remaining discreet. It gives a great rear visibility and can be fitted on any motorcycle. Available in black only.

It can be adjusted thanks to its articulated 135m long shaft and to the kneecap of the mirror. 

It's sold per unit, and comes with two adapters (left thread and right thread).

45 €

Handlebar mirror adapter

Handlebar adapters, required for mounting some mirrors. We offer two different solutions : 

  • 22mm handlebar adapter lower position, to mount our mini mirrors under your handlebar. 
  • Through rod fixation adapter, to mount any type of mirror in upper position on a handlebar with a through rod type fixation, in upper or lower position.

15 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long. They are bulbs indicators, classic and beautiful.

It's 21W bulbs blinkers.

Sold in pairs, it's an EU approved part.

19 €

Mini round aluminum turn signals

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

55 €

Mini LED turn signals

Mini LED turn signals in aluminium with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop.

Sold in pairs. Blinkers size : 19,5mm x 16mm. 12V / 3W.

78 €

Resistors for LED turn indicators

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. 

Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

8 €

Starter cover for Moto Guzzi V7

Starter cover for Moto Guzzi V7 and V9. Manufactured out of aluminium, this starter cover is easy to assemble over the original part. It's available in Satin black (powder coated) or Brushed aluminium finish. 

This part is suitable for Moto Guzzi V7 II, V7 III and V9. Designed and manufactured by our team in France.

19 €

Front turn signals bracket for Moto Guzzi

Turn signals support for Moto Guzzi, simple, effective and very discreet. Stainless steel laser cut and epoxy painted in satin black.

It mounts on the upper regulator screw of your motorcycle. Suits Moto Guzzi V7 I, V7 II, V7 III and V9. Sold without blinkers.

19 €

Rear turn signals bracket for Moto Guzzi V7

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the shock absorber axis for a more discreet look. 

Comes in pairs. This part suits Moto Guzzi V7 I, V7 II, V7 III and V9.

19 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Documents tube holder

This tube motorcycles documents holder enables you place your insurance card / document anywhere on your motorcycle. This cylinder is waterproof, the card remains perfectly visible, it's easy to assemble anywhere on the motorcycle. Available in black color only.

Height : 70mm / Diameter : 20mm.

32 €

Handlebar grips

Thruster left and right handlebar grips produced by Biltwell motorcycles. Allows a better handtaking of your handlebar, and an incredible look.

Available in black and brown. Comes in pairs.

Handlebar diameter 1 "or 22mm.

18 €

Handlebar grips

Left and right handlebar grips Renegade, produced by Biltwell for character motorcycle. Allows a better handtaking of your handlebar, and an incredible look.

Handlebar diameter 1 "or 22mm. Comes in pairs.

18 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we recommend you to paint it with a special high temperature painting, so the color can resist over the months.

It's a great quality part, beware of low-cost ones! Comes with 8 optional stainless steel collars.

83 €

Leather care cream

This cream is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc.

Capacity : 150 ml.

18 €

Headlight wiring harness extension

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness.

Length : 420mm

19 €

Rear fender wiring harness for Moto Guzzi - short

Rear fender wiring harness for Moto Guzzi. This wiring harness is essential to connect a aftermarket set of turn signals and taillight. It's plug & play over the pods of your motorcycle. 

This parts fit the Moto Guzzi V7, V7 II, V7 III and V9.

This part comes with all the mudguards we provide for Moto Guzzi. This wiring harness is designed and manufactured at our workshop in France.

19 €

Scroll To Top