Parts » Triumph » Thruxton (Before 2016)

Short seat kit without welding for Triumph

Short leather seat kit for Triumph Bonneville, Scrambler or Thruxton. Essential to achieve your motorcycle custom project, and without having to hire a professional to bend and weld a rear loop.

Comes with:

  • Machined aluminium short subframe system
  • Genuine leather saddle
  • Stainless steel mudguard with plate holder and bates taillight
  • Blinkers support

1 050 €

Plate holder // Thruxton Aluminum flashing

License plate support / fender eliminator for Triumph Thruxton (before 2016). This part is equipped with a taillight, a license plate lightning and approved blinkers. 

It's an aluminium part, satin black painted and with full stainless steel screwing. 

Designed and manufactured in our workshop in France

345 €

Leather saddle for Thruxton

This leather saddle for Triumph Thruxton is handmade by ourself at the workshop. To produce it, we work on your original saddle on which we re-work the foam and apply a new leather cap. It considerably improves the look of your Triumph. 

It's available in classic rib or diamond shaped ribbed. We use an high quality french leather to manufacture it.

550 €

Lighthouse / integrated speedometer Triumph

Needle speedometer for Triumph, integrated in a  Ø165mm metal casing fith M8 side fixation. Compatible with the original headlight supports.

  • Comes with an M-TRI CanBus electronic box for EFI Triumph since 2011.
  • Comes all wired / plug & play by ourselves for carburetor models.

Comes with installation instructions.

850 €

Lighthouse / mini integrated speedometer Triumph

Bonneville / Thruxton / Scrambler

Integrated speedometer in a metal lighthouse Ø165mm Side M8 fixings.

  • Delivered with M-TRI CanBus case for EFI models since 2011.
  • The version for carbureted models, is delivered over a cable lug compatible original beam.

100% plug and play, comes fully wired by us.

Universal version here.

650 €

Bindings headlight

Motorcycle headlight bracket, for M8 side fixation. The brackets are designed and manufactured in BAAK's workshop in France.

Only available in satin black.

  • Ø41mm for TRiumph Bonneville (60mm length for original lighthouse)
  • 40mm and 60mm length for Moto Guzzi V7
  • Ø41mm and length 60mm for Triumph Street and Twin T120 (Doesn't fit with original headlight)

99 €

Bates headlight / speedometer

Bates headlight with integrated speedometer for Triumph. Here's how to purify your Triumph while keeping all original features of a speedometer. The mini speedometer shows the total daily mileage, LED indicator, oil pressure, high beam, gas reserve and neutral.

Button operation speedometer is integrated in the casing of the lighthouse.

650 €

Plate bates flagship Triumph

Bates type headlight plate for Triumph Bonneville, Scrambler or Truxton. This motorcycle part is handcrafted in aluminium.

Essential to hide the steering column and all the cables after the mounting of a Bates headlight.

Comes with 4 black leather clamps. Available in satin black and raw aluminium finish.

Size : 220mm x 190mm.

99 €

Side license plate support for Triumph

Side license plate support / holder for Triumph Bonneville, Scrambler, Thruxton, Street Twin/ Street Cup, Bonnevile T100 (from 2016) and T120.

Attaches to the upper axis of the left shock absorber. Comes with a connection wiring harness. 100% plug and play accessory.

95 €

License plate support for Triumph original fender

License plate support with its tail light, for Triumph Bonneville - Scrambler - Thruxton original fender. Comes in place of the original block.

The mini turn signals are optional, it includes two pairs of turn signals, can be set in classic position or on the shock absorber axis. 

Designed and manufactured in our workshop in France.

150 €

Mini mudguard for Triumph

Mini stainless steel rear fender / mudguard for Triumph, equipped with a rear lamp, a license plate lightning, a license plate support and a fixing indicator.

Available for Triumph Bonneville / Scrambler / Thruxton from 1999 to 2016.

Designed and handcrafted in our workshop BAAK in France. Turn signals are optionnal.

295 €

Short rear steel fender - Brushed finish

Stainless steel rear short fender, equipped with a taillight with license illumination, a license plate holder, with a fixation flashing.

The cutting of the fender is very harmonious, while effective against the projections of the wheel.

Fits Triumph Bonneville / Scrambler / Thruxton from 1999 to 2016.
This product is designed and manufactured by hand in the workshop BAAK in France.

295 €

Brushed TT mudguard for Triumph

Rear fender equipped with a taillight, a license plate bracket and a flashing fixation.

Its square shape gives it a perfect all-terrain look for Scrambler.
For Bonneville / Scrambler / Thruxton from 1999 to today.

Designed and handcrafted in the workshop BAAK in France.

295 €

Black leather gas tank strap

Universal leather gas tank strap / belt, fits with any gas tank with cap on the side. It gives a distinguished look to your motorcycle tank. 

It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. It particularly fits for Triumph Bonneville, Scrambler, Thruxton, Street Twin and T120. Maximum lenght 190cm, minimum 107cm.

95 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

195 €

Leather handlebar grips - Aged brown leather and brown thread

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

145 €

Universal leather tank bag - Aged brown

Universal leather gas tank saddlebag. This discreet bag enables you to bring some stuff with you while riding. It's assembled with snaps on an adjustable leather strap that wraps the tank of side gas tank cap motorcycles. 

Its front pocket has a transparent touch-sensitive cover that enable to watch and use a GPS, smartphone or road map while travelling.

335 €

Leather saddlebag for Triumph

Side leather saddlebag for Triumph Bonneville, Scrambler, Thruxton (before 2016). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some objetcs and gives a retro distinguished look to your bike.

It comes mounting on a black satin painted aluminium plate that comes in place of your original side cover. 

245 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually.

29 €

Mini round mirror

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in black of chrome-plated finish.

29 €

Triumph Bobber exhaust

Bobber exhaust line for Triumph, designed and handcrafted at our workshop. The manifolds are in stainless steel, the mufflers in aluminium. 

It provides a rough and deeper sound but remains discreet. This part isn't road approved. 

Suits Triumph Bonneville EFI before 2016 (Bonneville, Thruxton and Scrambler) and carburetor. 

1 250 €

2win aluminum shock absorbers for Triumph

2 Win aluminium shock absorbers for Triumph. These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation simultaneous manner.

The manufacturer developed a line short version with BAAK, to give a chunky look to your bike, without sacrificing comfort. Available with or without short fork blocks.

370 €

Amortisseurs Hagon

Here is the classic version of the bi-Hagon shock absorbers. Suspensions that will improve the dynamic behavior of your motorbike.

Available in original size, or short version, for Triumph Bonneville / Thruxton / Scrambler and for Moto Guzzi V7.

Give priority to 2WIN shock absorbers for better performances.

229 €

Mini speedometer for Triumph EFI - Below the handlebar fixation

Tiny speedometer manufactured by motogadget for Triumph Bonneville, Scrambler or Thruxton. Mounted on a plate developed by BAAK Motorcycles, made in aluminium, epoxy  satin black painted.

Comes assembled and connected to a compatible wiring harness (plug and play).

Two locations available : Above the steering column (behind the handlebar) and classic position.

550 €

Speedometer cable for triumph

Mini round speedometer for Triumph Bonneville / Scrambler / Thruxton carburators with cable speedometers and Triumph EFI up to 2011.

With neutral indicator, wiring harness, oil pressure and turn signals.

This product is 100% plug and play.

219 €

Engine protection // sump guard for Triumph

Aluminium engine protection / sump guard for Triumph, gives an aesthetic style to your motorcycle and a better protection to your engine. Available for Triumph Bonneville / Scrambler / Thruxton before 2016.

Easy to assemble, comes with stainless steel screws and installation instructions.

95 €

Aluminium side covers for Triumph

Side covers for Triumph, made in aluminium and painted with a black satin epoxy painting. It replaces your original side covers. These parts will bring a strongest look to your motorcycle, using noble material.

Comes in pairs, with left and right fixation. Designed and manufactured in our workshop in France.

130 €

Scroll To Top