Parts » Moto Guzzi

Fatbar handlebar

Fatbar aluminium handlebar and clamps. This bar is perfect to give a more impressive look to your bike. This wide handlebar allows a more comfortable riding position than the original ones. 

The centric part is 28mm diameter, what requires using the new supplied handlebar clamps.

189 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in aged brown leather only, 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

5 €

Long cables kit for V7

Long cables kit for Moto Guzzi V7. Essential to fit a wide handlebars, from 76cm ​​wide.
Fits with Moto Guzzi V7 I, but doesn't suit Moto Guzzi V7 II.

The kit includes a clutch cable and brake hose. You don't need to change your accelerator cable.

49 €

Leather handlebar grips - Aged brown leather and brown thread

Leather handlebar grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. 

Available in aged brown, gold, black and ruby leather. Four thread colours available so it perfectly suits your bike.

Available for 25,4mm (1 inch) and 22mm handlebars.

145 €

Leather fork gaiters + stainless steel collar

Pair of genuine leather fork gaiters. These 6 or 8 folds fork gaiters are handmade in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. 

Diameter Ø41mm top and Ø63mm bottom, fits for Triumph Bonneville, Thruxton, Scrambler, Street Twin, T120 and Thruxton (except R version) and Moto Guzzi V7.

195 €

Bates headlight for Moto Guzzi

Bates type headlight for Moto Guzzi V7 and V9. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Moto Guzzi V7 I and V7 II, and Moto Guzzi V9. It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Moto Guzzi V9 Bates headlight bracket

Bates headlight fixation bracket for Moto Guzzi V9, required to mounta lower fixation headlight on your motorcycle.


Made in aluminium, 3mm thick, black epoxy painting. Available in black finish only. Comes with all the necessary stainless steel screwing.

25 €

Engine spoiler for V7

Aluminum laser cut engine protection / sump guard for your Moto Guzzi V7 I. Matt black painting. BAAK engine guard allows you to protect the lower motor projections of the front wheel. 

We designed it to give a bird's forward line, and give a chunky lok to the V7.

This skid plate is handmade in France by BAAK. This part doesn't suit V7 II.

145 €

Under handlebar mirror

Mini black Ø8cm mirror especially designed to be mounted below the handlebar in lower position. A very discreet look and a good visibility.

Available in Ø8mm through shaft version, or with adapter for 22mm handlebars. 

Sold individually.

29 €

Mini round mirror

Mini round mirror, Ø8cm with M8 threading, for upper position. The mirror stem is 13cm long, its shape was specificly designed to guaranty a good rear visibility and a discreet look.

Suits for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in black of chrome-plated finish.

29 €

Round mirror Ø10cm

We have selected this LSL mirror, because they are beautiful and useful. They are fully anodized aluminum, the Ø10cm diameter mirror is blue, neither too large nor too small. They offer a good field of vision.
This mirror come with M10 fixation and is sold individually.

89 €

Handlebar mirror adapter

Handlebar adapters, required for mounting some mirrors. We offer two different solutions : 

  • 22mm handlebar adapter lower position, to mount our mini mirrors under your handlebar. 
  • Through rod fixation adapter, to mount any type of mirror in upper position on a handlebar with a through rod type fixation, in upper or lower position.

15 €

Side license plate support for Moto Guzzi

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. 

This support is satin black epoxy painted. The blinkers and blinkers bracket are optional.

75 €

License plate support for Moto Guzzi V9 original fender

Moto Guzzi V9 license plate support for original rear fender. This satin black epoxy painted part comes in place of your original support.

This kit is composed of a license plate support, a round LED taillight with plate lightning, a pair of turn signals brackets on choice, a plug & play wiring harness and two optionnal pairs of blinkers. 

150 €

Mini Turn Signals

Mini blinkers. These small indicators are beautifully made and measures only 6cm long.
They are bulbs, classic and beautiful.

Sold in pairs, it's EU approved.

16,50 €

Mini round aluminum flashing.

Aluminium mini blinkers, 4cm diameter, 21W bulbs, made in aluminium.

Very nice finish, much more discreet than most of the original turn signals. We use it on the major part of our custom projects.

Sold in pairs. UE approved.

50 €

Plastic mini turn signals

Mini turn signals / blinkers made in plastic. With its M10 fixation, it comes in place of most of the original blinkers. 10w bulb included.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle.

Sold in pairs. Blinkers dimension : 45x55mm. 

19 €

Front turn signals bracket for Moto Guzzi

Turn signals support for Moto Guzzi, simple, effective and very discreet. Stainless steel laser cut and epoxy painted in satin black.

It mounts on the upper regulator screw of your motorcycle. Suits Moto Guzzi V7 I and V7 II and V9. Sold without blinkers.

19 €

Yellow light bulb globe

Yellow light bulb globe / cabochon for motorcycle headlight. Fits with H4 type bulbs. Allows you to offer a firmly vintage look to your motorcycle, without adding a filter on your headlight pane.

This product preserve the lighting qualities of your motorcycle. Perfect for a backdating projet.

8 €

Tiny mount bracket for Triumph

Mount bracket for Motogadget Tiny speedometer.

Available for Triumph Bonneville - Scrambler - Thruxton or MotoGuzzi V7.

Comes with all the necessary screwing.

49 €

Moto Guzzi V9 rearset

Machined rearset for Moto Guzzi V9. This machined aluminium kit enables you to move 70mm back the controls of your motorcycle and enjoy a more comfortable and sporty riding position. 

Manufactured at our workshop, satin black epoxy painting finish, comes in pairs with all the necessary stainless steel screwing.

95 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Screw shock absorbers V7

Pair of shock absorbers screws for Moto Guzzi V7. These stainless steel screws enable you to properly remove the original ugly passenger grab bar. 

Comes in pairs, with the necessary washers.

Suits Moto Guzzi V7 I and V7 II.

29 €

Fork gaiters in silicone

High quality silicone fork gaiters. For the following diameters fork tubes :

  • Ø41mm, Bonneville, Scrambler and Thruxton T100, Street Twin and T120. 
  • Ø40mm, Moto Guzzi V7 I et II, et V9.

Average length of 8cm (Beware of Chinese plastic ones which will resist a year !)

Comes in pairs.

45 €

Scroll To Top