Accessories » Triumph

Front fender Bonneville

Long and narrow mudguard for Triumph Bonneville. It's the narrower possible with the original fixation legs.

Stainless steel front fender, designed and manufactured in France in BAAK's workshop.
Narrower, shorter, less round than origin. But half the weight and still with a great protection!

99 €

Brushed TT mudguard for Triumph

Rear fender equipped with a taillight, a license plate bracket and a flashing fixation.

Its square shape gives it a perfect all-terrain look for Scrambler.
For Bonneville / Scrambler / Thruxton from 1999 to today.

Designed and handcrafted in the workshop BAAK in France.

295 €

M-TRI Motogadget pour Triumph

Multiplexing Case TRI-M manufactured by Motogadget for Triumph Bonneville Scrambler Thruxton EFI since 2011 to today.

Indispensable to remove the original speedometer, because without it the motorcycle will not start.

This box allows to resume all functionalized source and assemble all speedometer.


  • Wired
  • Unwired.

169 €

Wide fork Té for Triumph

Kit fork Té broad for Triumph Bonneville Scrambler Thruxton. 5mm wider than the original ones.

Required for mounting a 16" wheel at the front, and a 5.00" tire.

Geometry modified improves handling and compensate the big front tire !

630 €

Shocks Big-Body Bonneville

We developed this new custom large diameter shock especially for Triumph motorcycles. This is the biggest shock absorbers available for Bonneville, Thruxton and Scrambler : Ø80mm.

These shocks give a chunky look, which is great if you have a wide tire on your motorbike. This is the standard equipment of our Dandy and Bonnie Bonneville Classic.

Longevity 100 000km. Comes in pair of two shocks.

499 €

2win aluminum shock absorbers for Triumph

2 Win aluminium shock absorbers for Triumph. These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation simultaneous manner.

The manufacturer developed a line short version with BAAK, to give a chunky look to your bike, without sacrificing comfort. Available with or without short fork blocks.

370 €

Amortisseurs Hagon

Here is the classic version of the bi-Hagon shock absorbers. Suspensions that will improve the dynamic behavior of your motorbike.

Available in original size, or short version, for Triumph Bonneville / Thruxton / Scrambler and for Moto Guzzi V7.

Give priority to 2WIN shock absorbers for better performances.

229 €

Fork kit for Triumph (springs + short blocks)

This kit enables you to easily improve the front end performances of your Triumph. It includes Hagon progressive fork springs and optionnal short fork blocks that reduce the eight of your bike of 2,5cm.

This kit fits with Triumph Bonneville (T100 / SE), Scrambler and Thruxton, EFI or carburetor.

145 €

Shims short fork spring

To adapt our shorter shocks, and proportionally belittle the front of your Triumph Bonneville / Scrambler / Thruxton or Moto Guzzi V7, you will need these fork springs shims.

It comes simply replacing the original ones. It comes with installation instructions.

Available for:

  • Bonneville -2.5cm high. 
  • Thruxton, -2.5cm. 
  • Scrambler, -2cm.
  • Street Twin, -2,5cm.
  • Moto Guzzi V7 -3cm high.

19 €

Monza gas cap for Triumph

The legendary Monza-type plugs will fit perfectly on your tank via our exclusive adapter for Triumph Bonneville / Thruxton / Scrambler.

The complete kit consists of adapter, sealing gasket, screws and plug Monza.
Monza plugs are aluminum polished finish.

Only for Bonneville, Scrambler and Thruxton

119 €

AIS Removal Kit


Once this kit is installed, your bike is not approved for road use.
Any changes by you on your motorcycle is your responsibility.

Bonneville, Thruxton and Scrambler Triumph has carburetors.

19 €

Removal Kit lambda sensors

Installation of this kit eliminates the lambda probes / sensors, to lure the injection system for maximum engine power.

Once this kit is installed, your bike is not approved for road use.
Any changes by yourself on your motorcycle is your responsibility.

Fits with Triumph Bonneville, Thruxton and Scrambler Triumph injection.

59 €

Beringer braking kit

Beringer complete front braking kit for Triumph. This kit is composed of a radial 4 pistons caliper, an Aeronal Classic disk, a clutch control and a master cylinder. It garantees an better braking feeling and an improved power during every braking action.
The quality of these elements assures a great look for your motorbike. It's possible to buy each element of the kit separately. 

475 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Regulator - Turn signals - Horn support for Triumph

This support allows you to relocate your regulator, front turn signals and horn below your steering column. Visually lighten the line of the front of your bike by grouping these parts on one support.

Fits with Triumph Bonneville (T100 / SE), Thruxton and scrambler, EFI or carburetor.

Made in stainless steel in our workshop, black epoxy painting. 

49 €

Front turn signals bracket for Triumph

This turn signal bracket / support is simple, effective and very discreet. Stainless steel laser cut and epoxy painted matte black.

Fits with the bracket regulator Triumph, or can be screwed on the superior fixing of th the oil radiator.

Triumph Bonneville, Thruxton, Scrambler, Street Twin and T120. Sold without lights.

19 €

Rear turn signal support for Triumph

Simple, effective and very discreet.  Stainless steel bracket laser cut and painted in matt black epoxy.

Fits with any fender. Delivered without turn signals.

For Triumph Bonneville, Scrambler and Thruxton.

22 €

Switch Bracket Triumph

Simple and effective, moves the ignition switch between the fuel tank and the carburetor left. Fits right on the injection models.

Required to move under the tank, the harness that is in the headlight without having to lengthen any electrical cable.

Aluminum, laser cut, painted in black satin.

49 €

Bracket regulator Triumph

This plate allows you to move the voltage regulator, instead of the horn. The horn can be attached below, on the same plate.

This board can agree with Front barcket flashing
Aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

30 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton and Street Twin - T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

Fork gaiters in silicone

These are bellows made of high quality silicone. For fork tubes :

  • Ø41mm, Bonneville, Scrambler and Thruxton T100, Street Twin and T120. 
  • Ø40mm, V7 all models.

Average length of 8cm (Beware of Chinese plastic bellows which will resist a year !)

Comes in pairs.

45 €

Mini Clignotants

These small indicators are beautifully made and measures only 6cm long.
They are bulbs, classic and beautiful.

(sold in pairs)
EU approved.

16,50 €

Mini turn signals Street Twin / T120

Mini turn signals for Triumph Bonneville T120 / Street Twin / Thruxton 1200. With its M10 fixation, it comes in place of the original ones.
10w bulb.

Much more discreet than the original blinkers, it offers a better finish to your motorcycle.

Sold in pairs. Blinkers dimension : 45x55mm. 

19 €

Scroll To Top