Parts

Royal Enfield Continental GT exhaust line

Exhaust ligne for Royal Enfield Continental GT. Manufactured in stainless steel, it's lighter than the original exhaust system, and its brushed finish will bring a better look to your bike.

The sound provided by this exhaust is deeper, but stays reasonable. The exhaust baffle is removalbe.

590 €

Triumph Off Road brushed silencer

Off Road silencers for Triumph Bonneville T100. A bit shorter and less slanted than the original, they improve noise and performences your Triumph.

At Triumph's, this muffler exists only in chrome finish. We offer them brushed finish for you bike to be different from the others with a custom exhaust line.

485 €

Stainless steel exhaust for Triumph

Pair of stainless steel exhaust mufflers for Triumph Bonneville. These silencers are handcrafted in France. Available in chromed or brushed finish, it offers a deep and smooth sound. 
It's not road approved, but their sound is quite discreet (less than 100 Db). It's lighter than your original mufflers and will improve your engine performances. 

865 €

Universal Bates headlight / speedometer

Here's how to purify your machine while keeping all original features of a speedometer. The mini speedometer shows the total daily mileage, LED indicator, oil pressure, high beam and neutral. Button operation speedometer integrates discreetly the casing of the lighthouse.

Lighthouse Ø15cm to lower fixing bates style, equipped with a speedometer Ø5,3cm upscale.

450 €

Bates headlight / speedometer for Moto Guzzi

Bates headlight with Tiny integrated speedometer for Moto Guzzi V7 I and V7 II. It enables you to keep all the original features of your speedometer : oil pressure, neutral, light, turn signals controls, gas reserve, injection defect and engine overheating. This product comes with its electronic box.

The opperation button of the speedometer integrates the casing of the lighthouse.

809 €

Lighthouse / mini integrated speedometer Triumph

Bonneville / Thruxton / Scrambler

Integrated speedometer in a metal lighthouse Ø165mm Side M8 fixings.

  • Delivered with M-TRI CanBus case for EFI models since 2011.
  • The version for carbureted models, is delivered over a cable lug compatible original beam.

100% plug and play, comes fully wired by us.

Universal version here.

650 €

Bates headlight for Moto Guzzi

Bates type headlight for Moto Guzzi V7 and V9. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Moto Guzzi V7 I and V7 II, and Moto Guzzi V9. It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Bates headlight for Triumph

Bates type headlight for Triumph. This lower fixation lighthouse is 15cm diameter. Its casing and trim ring enables you to visually lighten your fork tubes and improve the look of your motorcycle.

Suits the Triumph Bonneville / Thruxton / Scrambler (before 2016) and the Triumph Street Twin / T100 / T120 (since 2016). It comes with a fixation bracket and a plug & play wiring harness.

114,01 €

Beringer braking kit

Beringer full front braking kit for Triumph Bonneville T120, Thruxton 1200 Street Twin. This kit is composed of a radial 4 pistons caliper, an Aeronal Classic disk, a clutch control and a master cylinder. 
For Triumph Bonneville T120 and Thruxton 1200, this kit includes two disks and two calipers.

325 €

10mm headlight strut

Motorcycle headlight struts, made in aluminium, to perfectlly adjust the fixation of your headlight. The hole diameter is 8mm, the exterior diameter is 29mm.

For Moto Guzzi V7 headlight : 10mm

For Triumph headlight : 5mm

11 €

Screw shock absorbers V7

Pair of shock absorbers screws for Moto Guzzi V7. These stainless steel screws enable you to properly remove the original ugly passenger grab bar. 

Comes in pairs, with the necessary washers.

Suits Moto Guzzi V7 I and V7 II.

29 €

Thermal tape

Here are 15 meters from thermal wrap, 5 cm wide, to bundle up your exhaust system and give you a look of BAD BOY.

For black color, we advise you to paint with a special high temperature painting, so the color can resist over the mounths.

It's a great quality part, beware of low-cost ones!

59 €

Long cables kit for V7

Long cables kit for Moto Guzzi V7. Essential to fit a wide handlebars, from 76cm ​​wide.
Fits with Moto Guzzi V7 I, but doesn't suit Moto Guzzi V7 II.

The kit includes a clutch cable and brake hose. You don't need to change your accelerator cable.

49 €

Kit long cables for Triumph

Long cables kit for Triumph, essential to fit a wide handlebar for:
(From 76cm ​​wide)

  • Bonneville T100 handlebars 1 " (25,4mm)
  • Thruxton handlebars 1 " (25,4mm)

This kit is composed of the clutch cable, the accelerator cable and the brake hose.

39 €

Leather cables guide

Leather cable guide. This strap enables you to fasten you cables, or tie it together to your handlebar. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. 

Available in aged brown leather only, 85mm, 105mm, 120mm or 135mmlenght. 20mm wide. 

Doesn't come in pairs.

5 €

AIS Removal Kit

warning:

Once this kit is installed, your bike is not approved for road use.
Any changes by you on your motorcycle is your responsibility.

Bonneville, Thruxton and Scrambler Triumph has carburetors.

19 €

Removal Kit lambda sensors

Installation of this kit eliminates the lambda probes / sensors, to lure the injection system for maximum engine power.

Warning:
Once this kit is installed, your bike is not approved for road use.
Any changes by yourself on your motorcycle is your responsibility.

Fits with Triumph Bonneville, Thruxton and Scrambler Triumph injection.

59 €

Regulator - Turn signals - Horn support for Triumph

This support allows you to relocate your regulator, front turn signals and horn below your steering column. Visually lighten the line of the front of your bike by grouping these parts on one support.

Fits with Triumph Bonneville (T100 / SE), Thruxton and scrambler, EFI or carburetor.

Made in stainless steel in our workshop, black epoxy painting. 

49 €

Front turn signals bracket for Triumph

This turn signal bracket / support is simple, effective and very discreet. Stainless steel laser cut and epoxy painted matte black.

Fits with the bracket regulator Triumph, or can be screwed on the superior fixing of th the oil radiator.

Triumph Bonneville, Thruxton, Scrambler, Street Twin and T120. Sold without lights.

19 €

Rear turn signal support for Triumph

Simple, effective and very discreet.  Stainless steel bracket laser cut and painted in matt black epoxy.

Fits with any fender. Delivered without turn signals.

For Triumph Bonneville, Scrambler and Thruxton.

22 €

Switch Bracket for Triumph

Switch support for Triumph. This simple switch support enables you to move the ignition switch between the fuel tank and the left carburetor. Fits right side on the injection models.

It requires to move the harness that is in your headlight, under the gas tank, without having to lengthen any electric cable. 

Aluminum, laser cut, painted in satin black epoxy painting.

49 €

Bracket regulator Triumph

This plate allows you to move the voltage regulator, instead of the horn. The horn can be attached below, on the same plate.

This board can agree with Front barcket flashing
 
Aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank.

30 €

Rear turn signals brackets for Triumph

Rear turn signals bracket for Triumph Bonneville, Scrambler, Thruxton, Street Twin, T100 (from 2016) and T120.

Enables you to mount your turn signals on the shock absorber axis for a more discreet look. Compatible with the original passenger grab handle.
Flashing Axis ø10mm, shock absorber axis Ø14mm or Ø16mm, length 50mm.

Comes in pairs.

19 €

M-TRI Motogadget pour Triumph

Multiplexing Case TRI-M manufactured by Motogadget for Triumph Bonneville Scrambler Thruxton EFI since 2011 to today.

Indispensable to remove the original speedometer, because without it the motorcycle will not start.

This box allows to resume all functionalized source and assemble all speedometer.

available:

  • Wired
  • Unwired.

349 €

Scroll To Top